Market Forge Industries ST-3E ユーザーズマニュアル
4
INTRODUCTION
Square the door to the unit by raising or lowering the
hinge side of the door, keeping the latch centered
with the striker.
22. Visually inspect the door. Be sure that the door
22. Visually inspect the door. Be sure that the door
is square to the unit, the striker is centered with the
latch, and the gasket is in contact with the entire lip
of the cooking compartment.
23. Gently open the cooking compartment door, tak-
23. Gently open the cooking compartment door, tak-
21.
22.
23.
ing care not to move it out of position.
Tighten all 4 door hinge bracket mounting screws.
Close and visually inspect the door again, as de-
Tighten all 4 door hinge bracket mounting screws.
Close and visually inspect the door again, as de-
scribed in step 22.
Reinstall the left and right side panels, using the
Reinstall the left and right side panels, using the
screws for each panel.
24.
25.
25.
26.
Fig. 3 Supplemental Wire Sheet