Bunn AF PR-3 ユーザーズマニュアル

14

1.  Separate the pump head from the pump body. 

Hold pump head as shown in Fig. 18, with roller 

in the  2, 6 10 o’clock positions.

2.  Wrap tubing around rollers and hold as shown in 

Fig. 18.

3.  Insert the slot of the tubing key (supplied), as 

shown in Fig. 18 on the rotor so the bottom edge 

of the key is pressing the tubing into the pump 

head cavity.

4.  Push down and turn the key counterclockwise to 

guide the tubing deep into the pump head cavity 

as shown in Fig. 19.

5.  Hold the tubing and rotor in the pump head and 

remove key carefully.

6.  Place pump body on the rotor shaft.

7.  Squeeze the pump body and pump head together 

simultaneously until pump body and pump head 

are touching on all sides. Be careful not to pinch 

the tubing between the pump body and the pump 

head.

FIG. 18  TUBING START POSITION

P1542

ROLLERS

PUMP

HEAD

TUBING

KEY

ENTRY

PORT

EXIT

PORT

FIG. 19 TUBING LOADED

ROTOR

ROTOR

SHAFT

P1541

28791.1 011500