Liebherr WS 17800 ユーザーズマニュアル
8
o
peraTion
Operating and control elements
The electronic control panel uses
touch capacitance
technology. Any function can be activated by touching
the corresponding icon.
The exact contact point is
between the symbol and its label
1
On/Off button (switching the appliance on and off)
2
Fan switch
3
Interior light On/Off button
4
Display
5
Button to activate a compartment to adjust its
temperature
6
Temperature setting buttons
7
Audible warning On/Off button
Temperature display
These symbols indicate which compartment is active so
that its temperature can be adjusted.
Upper compartment temperature display
Middle compartment temperature display
Lower compartment temperature display
Symbols in the display
Alarm (symbol flashes if the temperature inside
the appliance is too high or too low)
Demo mode is activated
Sabbath mode is activated
Setup mode is activated (activating the child lock
and adjusting the display brightness)
The interior fan runs constantly
Child lock is activated
The interior light is switched on constantly
Switching the appliance on and off
Switching the appliance on
Press the
On/Off button until the temperature
display lights up.
Switching the appliance off
Keep the
On/Off button pressed for approx. 3 seconds
so that the temperature display goes out.
Demo mode
Demo mode can be activated for presenting the appli-
ance at exhibitions or in salesrooms as though in nor-
mal operating mode.
DEMO appears in the display.
When in this mode, the cooling circuit is switched
off!
If this mode is activated by accident, it can be deacti-
If this mode is activated by accident, it can be deacti-
vated as detailed below.
Press
+
for 5 seconds.
Display =
Display =
The refrigeration unit switches on. The tem-
perature display flashes.
The appliance is now in normal operating mode.