KitchenAid W10526086A ユーザーズマニュアル

3. Determine and mark edge of range in the cutout space. The 

mounting bracket can be installed on either the left side or 
right side of the cutout. Position mounting bracket in cutout 
so that right (or left) edge of the bracket is 

¹⁵⁄₁₆" (2.4 cm) from 

the marked edge of the range, as shown.

4. Drill two 

¹⁄₈" (3.0 mm) holes that correspond to the bracket 

holes of the determined mounting method. See the following 
illustrations.

5. Using a Phillips screwdriver, mount anti-tip bracket to the wall 

or floor with the two #12 x 1

⁵⁄₈" screws provided.

1. Disconnect power.

2. Use Phillips screwdriver to remove the terminal block cover 

screw located on the back of the range. Pull cover down and 
toward you to remove cover.

3. Remove plastic tag holding three 10-32 hex nuts from the 

middle post of the terminal block.

¹⁵⁄₁₆

A

B

C

⁵⁄₈

⁵⁄₈

A

B

A

B