KitchenAid 5KHB3583 ユーザーズマニュアル

Plug in the charger.

Slide the battery into the charger, 

aligning the flat side of the battery to the 

flat side of the port, and push down to 

click into place. 

The LED indicator will begin to flash 

slowly and continuously as it charges. 

When the battery is fully charged, the 

LED will display a continuous light.

NoTE: 

If the charger quickly flashes three 

times after inserting the battery, there is a 

battery error. Check that the battery is placed 

properly in the charger. If the light continues 

to flash rapidly, the battery may be extremely 

cold, hot, wet or damaged. Allow the battery 

to cool down, warm up or dry out, then 

reinsert. If the problem persists, see the 

“Service and Warranty” section.

Charge the battery after each use, when 

the battery indicator lights show less 

than 25% battery life remaining (only 

one light displays on the LED battery 

life indicator), or when the battery is 

completely drained.

Push the lid release button to open  

the lid.

NoTE: 

Batteries do not develop a “memory” 

when charged after only a partial discharge. It  

is not necessary to run down the battery 

before placing it on the charger.

W10532509A_01_EN_Final4.indd   9

12/11/12   1:34 PM