Mellerware 62007 ユーザーズマニュアル

          

All parts of the blender are to be thoroughly 
cleaned before being used for the first time.

Assembling the Jar:                                                
1. Put the rubber sealing ring (5) on the inner edge 

of the blade unit (6).

2. Put the blade unit with sealing ring into the cup 

base (7).

3. Inset the ring (4) on the bottom of jar first, then 

Insert the assembled cup base onto the bottom 
of the jar (3) and turn clockwise to secure tightly 
in place.

4. Mount the Measure Cup (1) onto the Lid (2).  
5. Secure the Lid onto Jar and press into place.

Inserting the Jar:                                                     
1. Make sure that the blender is switched off 

(Switch in the ‘0’ setting).

2. Place the jar assembly (9) on to the motor base 

(8) and press down until securely engaged.

   

1. Place the foodstuff you wish to process into the 

jar.

2. Place the lid on the jar and close securely. Place 

the measuring cap into the hole in the lid and 
turn clockwise to lock.

3. Place your hand on the lid and apply firm 

pressure before switching the unit ON. The 
appliance is fitted with a safety switch and 
requires sufficient downward pressure to 
operate.

4. Switch on the motor base to desired setting:

Speed setting         Use
1                               for light usage with liquids
2                   

for more solid consistency –      

                   

for mixing liquids and solid    

                              foodstuffs

0                               stop operation 
M                    

for ice crushing & short,   

                              powerful impulse movements

(The switch does not permanently engage in the 

‘PULSE’ setting. You have to hold the switch in 
the ‘PULSE’ setting or turn it repeatedly into the 
‘M’ setting)

After using the blender, always move the switch 

into the ‘0’ setting and pull out the mains plug.

To remove the glass jar simply lift it off the motor 

base. You do not have to rotate the glass jar to 

remove it.

Useful tips:                                                                   
• 

To achieve the best results when pureeing 
solid ingredients, place small portions into 
the glass jar one by one instead of placing a 
large quantity all at once.

• 

If you are processing solid ingredients, cut 
them into small pieces (2-3cm) first.

• 

When mixing solid ingredients start off first 
with a small amount of liquid. Gradually add 
more and more liquid through the opening 
in the lid.

• 

Always place your hand on top of the 
blender when you are operating the device.

• 

For stirring solid or very thick liquid 
ingredients we recommend that you use 
the blender in impulse mode to prevent the 
blades from becoming stuck.

Motor Base:                                                                   
Never immerse the motor base in water. Wipe it 
only with a damp cloth.

Simple cleaning/ rinsing out the assembled glass 
jar:                           
Empty the glass jar and fill it with water. Place the 
glass jar on the motor base and turn the switch 
several times into the ‘M’ setting. Empty the glass 
jar and rinse until clean.

WARNING: THE JAR OR ANY PART OF THE 
JAR ASSEMBLY IS NOT BE CLEANED USING A 
DISH WASHER. USE OF A DISH WASHER MAY 
RESULT AND DAMAGE AND THE WARRANTY 
WILL BE VOID.

 

                                                    

We guarantee that this product has been 
thoroughly inspected and tested before 
dispatched and is free from mechanical and 
electrical defects. Should defects due to faulty 
material or workmanship develop within one year 
from date of purchase, under normal domestic 
use, the appliance will be repaired free of charge.
Note: If this product is used commercially the 
guarantee is limited to 90 days.
Kindly retain your purchase slip for this must be 
presented if making a claim under the terms of 
the guarantee. If such proof is not available the 
product shall be deemed to be older than one 
year and a charge for service and \ or spares will 

MW_ 620007-62000_Apollo_IM .indd   3

MW_ 620007-62000_Apollo_IM .indd   3

3/19/2010   12:12:20 PM

3/19/2010   12:12:20 PM