FoodSaver V3800 プリント

To Clean Appliance: 
Open appliance door (D), while holding the appliance with two hands, press two Release Buttons (K) with your 
thumbs, rotate appliance away from you, and allow appliance to rest on the counter. After cleaning, hold appliance 
with two hands and rotate upright until the latches lock.

For important product maintenance information and helpful tips, please refer to the FoodSaver

®

 Reference Guide 

included in your kit.

Antibacterial Drip Tray & Upper Bag Detection Tray
Empty Drip Tray after each use (See Fig. 7). Wash in warm soapy water or place in top rack of dishwasher. The Food 
Sensors in the Drip Tray (O) will not function correctly if liquid is allowed to remain in Drip Tray.

This appliance has a Tray Full indicator

  2 

. When excess liquid fills the Drip Tray, the unit will turn off and the Tray 

Full Indicator light will activate. To resume normal operation, open Appliance Door (D), press two release buttons 
(K), rotate appliance away from you, and allow appliance to rest on the counter. Remove the Drip Tray, empty
liquid, clean Drip Tray and replace in housing. When replacing drip tray, set the right end of the drip tray into place, 
then firmly snap the left side down (See Fig. 8). Appliance can be used without Drip Tray, however the Adjustable 
Food Sensor setting

  6  

will not function without the Drip Tray. 

Clean Upper Bag Detection Tray after each use. The Upper Bag Detection Tray (P) is removable for cleaning, remove 
by lifting the tabs on each end. Do not pull on the Upper Bag Detection Flags to remove the Upper Bag Detection 
Tray. Clean Upper Bag Detection Tray by washing in warm soapy water or placing in top rack of dishwasher. Upper 
Bag Detection Tray MUST be inserted to use the appliance. Without the Upper Bag Detection Tray, your FoodSaver

®

 

Appliance will not detect bag when inserted in the Vacuum Channel (E).

©2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. 
All rights reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden 
Consumer Solutions, Boca Raton, Florida 33431.

Printed in China.

P.N.128164

T180-00455

for V3800 series appliances

To indicate current setting, vacuum 
progress and for added control.

Blue lights signal progression of
vacuuming and sealing process.
All lights extinguish when the full
process is finished. 

CrushFree

™

 Instant Seal feature. 

Prevents crushing delicate items.

Opens to access Built-in Roll Holder 
and Cutter.

Simply insert bag and the FoodSaver

®

 

appliance does the rest.

Accessory Port
Accessory hose can be used with all 
FoodSaver

®

 Brand Accessories.

Quick and convenient, opens sealed 
bags with ease.

Non-stick Coating
Provides extra secure, airtight
seal that’s two times wider.

Catches overflow liquids 
and contains Food Sensors 
to detect liquid. 

For important safety information and helpful tips, please refer to 
the FoodSaver

®

 Reference Guide included in your kit. 

Questions? Visit us at www.foodsaver.com to get tips on vacuum sealing and 
order FoodSaver

®

 brand accessories, bags and rolls, or call 1-877-777-8042 (U.S.).

For storage of FoodSaver

®

 

Vacuum Sealing Rolls. 

Simplifies making 
custom-sized bags.

Simply insert open end of bag 
into the vacuum channel and the 
machine will sense and grasp the 
bag, vacuum, seal and shut-off 
automatically.

K.  Release Buttons 

To open appliance 
for cleaning.

L.  Appliance Door 

Opens to access Built-in 
Roll Holder and Cutter.

V3860

4

10

11

Registering your appliance is quick and easy at www.prodregister.com/foodsaver. If you register on our website, 
you will have the opportunity to receive special bag and accessory introductory offers. Refer to the registration card 
in the box.

For more usage tips and safety information, please refer to the FoodSaver

®

 Reference Guide or visit our website at 

www.foodsaver.com.

1

2

3

5

6

9

8

7

1

2

3

4

5

6

7

8

9

10

11

POWER BUTTON: 
Press the power button to begin. The Power Indicator, 
Speed Indicator and Food Indicator lights will become 
illuminated. After Vacuum Sealing, press Power Button 
to turn appliance Off. Note: After 12 minutes, the
appliance will turn Off automatically.

TRAY FULL INDICATOR LIGHT: 
During the vacuum sealing process, small amounts of 
liquids, crumbs or food particles can be inadvertently 
pulled into the Drip Tray (O). When excess liquid fills 
the Drip Tray, the unit will turn off and the Tray Full 
Indicator 

 2 

 will activate. To resume normal operation, 

remove the Drip Tray, empty liquid, wash in warm 
soapy water or place in top rack of dishwasher. Dry and 
replace Drip Tray in trough. (See Care and Cleaning)

MARINATE MODE BUTTON 
A ten minute predetermined sequence of vacuum pulse 
to rest ratio allowing foods to get optimum flavor
infusion in the least amount of time. See “Marinating 
with your FoodSaver

®

” section on page 5.

CANISTER MODE BUTTON 
Press to achieve best vacuum for canisters and 
accessories. Push Canister Vacuum Button 

 4

  to begin 

vacuum process. Motor will run until Vacuum Sealing 
Process is complete.

SPEED SETTINGS BUTTON
When vacuum sealing delicate items, press Speed 
Setting Button  

5

  so that the gentle speed indicator 

light is illuminated. For more control you may press 
Seal Button  

9

  at any time to stop vacuum and begin 

automatic sealing process. Note: Appliance will default 
to Normal speed upon pressing the Power On Button or 
when power has been interrupted.

ADJUSTABLE FOOD SETTINGS BUTTON
For optimal vacuuming and sealing of moist or juicy 
foods, press the Adjustable Food Setting Button 

 6

  

until the Moist Indicator Light is illuminated. Choose the 
dry food setting for foods without liquid.

The Moist Food Indicator light will flash when Food 
Sealing Sensors automatically detect any moisture or 
liquid in the drip tray (O). 

Note: Appliance will default 

to Dry setting upon pressing the Power Button or when 
power has been interrupted, unless liquid is detected 
in the Drip Tray. (See Care and Cleaning section of this 
Quick Start Guide).

CANCEL BUTTON
Immediately halts the current function opening the 
Vacuum Channel.

PAUSE OR PulseVac™ CONTROL BUTTON 
(*not available on all models) 
Use to manually control the vacuum process and 
avoid crushing delicate items. See tips section for
further information.

SEAL BUTTON 
CrushFree

™

 Instant Seal feature-

1.  Press to immediately stop the vacuum process 

and begin sealing the bag. This prevents crushing 
delicate items such as bread, cookies and pastries. 

2.  Press to create a seal when making bags from a 

FoodSaver

®

 Roll. 

3.  Press to create a seal on Mylar bags (such as a 

potato chip bag) to keep food sealed airtight. 

4. Press during 

PulseVac

™

 mode to seal bag.

VACUUM PROGRESS DISPLAY
Displays vacuum levels as the bag/canister is 
evacuated. 

SEAL INDICATOR LIGHT 
Constant Red light indicates sealing process is 
engaged. (Flashing light indicates error)

FSV3800.indd   5-2

FSV3800.indd   5-2

5/27/08   4:58:00 PM

5/27/08   4:58:00 PM