KitchenAid KFP1344 ユーザーズマニュアル

1. Place the mini-bowl inside the work bowl 

over the power shaft. Rotate the mini-

bowl until the tabs on the top edge of the 

bowl drops into the indents on the top of 

the work bowl.

2. Insert the drive adapter into the mini-

blade, and place on the power shaft. It 

may be necessary to rotate the blade until 

it falls into place. Press down firmly to lock 

it into place. 

3. Install the work bowl cover, being sure it 

locks into place. 

4. To remove the mini-bowl after processing, 

remove the mini-blade by pulling straight 

up on the cap. Then lift the bowl straight 

up and out, using the two finger grips 

located along the top edge of the bowl.

IMPORTANT: The multipurpose blade 

and dough blade can only be used with the 

work bowl. 

1. Place the blade on the power shaft. 
2. Rotate the blade so it falls into place on 

the power shaft. 

3. Push to lock: Press down firmly on the 

multipurpose blade until it is down as  

far as it will go. The multipurpose blade 

features an internal seal that fits tightly 

over the center of the work bowl.

4. Install the work bowl cover, being sure it 

locks into place. 

W10407578A_ENv2_bk.indd   14

7/1/11   5:45 PM