Multiquip WM-70P (Plastic) ユーザーズマニュアル

1.

Place the 

belt slip lever in the start/stop  position

(Figure 20).

2.

Push the main 

start/stop switch (Figure 15) inward to

stop the engine.

3.

Turn the fuel shut-off valve to the OFF position.

4.

Disconnect the spark plug.

5.

Clean mixer as referenced in the maintance section of
this manual.

1.

Place the electric motor's 

ON/OFF switch  (Figure 7) in

the OFF position.

2.

Disconnect the electric motor's extension cord from its
power source.

3.

Clean mixer as referenced in the maintance section of
this manual.

NEVER disable or disconnect the start/stop switch. It is
provided for operator safety. 

Serious Injury may result if

it is disabled, disconnected or improperly maintained.

It is recommended that the mixer's
Start/Stop switch be used to stop
the engine after every use.

Doing this will verify that the switch is working properly and
presents no danger to the operator.