Panasonic AW-PH650N ユーザーズマニュアル

16

CPU circuit board switch settings

Set switches SW1, SW2 and SW3 on the CPU circuit board as follows.



  SW1 (Selector switch for landing characteristics)  

For a soft landing: 

Set SW1 to the left position (RP501). (Factory setting)

  For an exact landing:  Set SW1 to the right position (RP605). 



  SW2 

Do not change the position of this switch. Continue to use it at the DESK TOP position.



  SW3 

Do not change the position of this switch. Continue to use it at the RS-422 position.

• Before setting these switches, be absolutely sure to turn off the power of the AC adapter connected to the pan/tilt head.
•  The switch settings are not changed simply by changing the position of the switches. 

After changing the position of a switch, turn the power off and then back on to actually change the setting of that switch.