Sterling 1200 ユーザーズマニュアル
BJ5-615
Chapter 4: Operation
29 of 85
• Throw the grinding material into the in-feed hopper.
• The machine should be fed from the front.
• If your machine has an additional in-feed device installed, please observe the
• The machine should be fed from the front.
• If your machine has an additional in-feed device installed, please observe the
additional information for working with the in-feed device.
DANGER! Do not climb into the in-feed hopper while operating the
machine. Death will result.
machine. Death will result.
Emptying the Screen (standard screen)
1. Switch OFF the shredder at the main switch
2. Safeguard main switch using a padlock.
3. Open the machine door.
4. Safeguard the machine door.
5. Hold the screen with a forklift.
6. Remove the screen.
7. Empty the screen.
8. Put the screen back using a forklift.
9. Fasten the mounting screws.
10. Close the machine door.
11. Shredder can be started again.
1
4
2
3
(1) Screen
(2) Screen mounting screws
(3) Cutter adjusting screws
(4) Forklift
(2) Screen mounting screws
(3) Cutter adjusting screws
(4) Forklift