Sharp MX-FR28U ユーザーズマニュアル
28
Document Control Setting
Step 2: If the [Allow User to Select the Print Color] checkbox is selected in
[Document Control Print Select] in the system settings, touch the [Bk
(Black)] key, the [C (Cyan)] key or the [Y (Yellow)] key.
(Black)] key, the [C (Cyan)] key or the [Y (Yellow)] key.
The key of the color selected in [Print Color Setting] in the system settings is initially
selected. However, if the color mode of the stored file is set to a mode other than full
color, [Bk(Black)] will be selected and it will not be possible to change the setting to
[C(Cyan)] or [Y(Yellow)].
selected. However, if the color mode of the stored file is set to a mode other than full
color, [Bk(Black)] will be selected and it will not be possible to change the setting to
[C(Cyan)] or [Y(Yellow)].
After touching one of the keys, touch the upper [OK] key.
Step 3: Touch the [Print and Delete the Data] key or the [Print and Save the Data]
key.
■ Using the document control function in Internet Fax Receive/
Fax Receive/List Print modes
No special operation is required. When printing takes place, a black and white document
control pattern is embedded according to the document control function settings in the
system settings.
control pattern is embedded according to the document control function settings in the
system settings.
■ Body text commands for E-mail Direct Print
The command below can be entered in the body text of a direct print e-mail to specify
whether or not a document control pattern is to be printed.
whether or not a document control pattern is to be printed.
Function
Command name
Value
Entry example
Pattern printing
ON/OFF
ON/OFF
DOCUMENTCONTROL
ON
OFF
OFF
DOCUMENTCONTROL=ON