Mitsubishi Electronics SW3D5C-ACT-E ユーザーズマニュアル
6 - 39 6 - 39
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
6.5 CPU COM Communication
This section provides the CPU COM communication procedure and its setting example
using the utility setting type.
using the utility setting type.
6.5.1 Accessing procedure
The procedure for making access to the programmable controller CPU using CPU
COM communication will be explained in the following order.
COM communication will be explained in the following order.
START
Connect the programmable controller CPU and
IBM-PC/AT compatible.
IBM-PC/AT compatible.
Start the communication setup utility and make
setting on the communication setting wizard.
setting on the communication setting wizard.
On the communication test screen, check whether
communication can be made properly.
communication can be made properly.
END
Refer to Chapter 2.
Refer to Section 6.5.1 (2).
Refer to Section 6.5.1 (3).
(1) System
example
The following system example is used in this section.
Logical station number of "3" is used.
IBM-PC/AT compatible
(MX Component) COM1
is used.
(MX Component) COM1
is used.
Q02H
CPU
Normal station
(Sta. No.2)
MELSECNET/H
(Network No. 5)
Q02H
CPU
Normal station
(Sta. No.5)