Mitsubishi Electronics SW3D5C-ACT-E ユーザーズマニュアル
5 - 7 5 - 7
MELSOFT
5 UTILITY OPERATIONS
5.1.6 Operations on communication setting wizard screens
These screens are used to set the logical station number necessary to make
communication with the utility setting type.
communication with the utility setting type.
(1) Outline of the communication setting wizard
The logical station number necessary to make communication with the utility
setting type is set in the wizard format.
The places and descriptions of the settings made on the communication setting
wizard screens will be given below.
For the wizard screen settings, refer to "(3) Explanation of the communication
setting wizard screens".
setting type is set in the wizard format.
The places and descriptions of the settings made on the communication setting
wizard screens will be given below.
For the wizard screen settings, refer to "(3) Explanation of the communication
setting wizard screens".
MX
Component
Wizard 4)
Wizard 1), 6)
Wizard 3)
Wizard 5)
IBM-PC/AT
compatible
Connected
station
Relayed station
Connected network
Relayed network
Wizard 2)
Screen Name
Description
Wizard 1)
Used to set the logical station number.
Wizard 2)
Used to set the connected network between the IBM-PC/AT compatible and
connected station (programmable controller CPU and module).
connected station (programmable controller CPU and module).
Wizard 3)
Used to set the connected station (programmable controller CPU and module).
Wizard 4)
Used to set the relayed network between the connected station (programmable
controller CPU and module) and relayed station (programmable controller CPU
and module).
controller CPU and module) and relayed station (programmable controller CPU
and module).
Wizard 5)
Used to set the relayed station programmable controller CPU.
Wizard 6)
Used to comment the logical station number.
(2) Starting procedure
Select the [Menu]-[Wizard] on the menu bar.
(You can also start by clicking Wizard displayed on the utility screen.)
(You can also start by clicking Wizard displayed on the utility screen.)
Click!