Indesit CAA 55 XX (UK) ユーザーズマニュアル

Warning: Before attempting to remove the doors, switch off the electrical supply and pull out the mains plug.
It is recommended that you remove any loose items/fittings from inside the appliance and place food into insulated 
containers whilst carrying out this operation.
You may require assistance to carefully lay the appliance onto its back onto suitable protective materials (i.e. original 
packaging).

Remove the doors 
1. Lay down the appliance on its 

back.

2. Unscrew, remove and retain the 

bottom hinge.

3. Slightly open the bottom door 

and slide downward remove 
and carefully place to one side

4. Remove centre hinge and 

spacer if fitted. Slightly open the 
top door and slide downwards, 
remove and carefully place to 
one side.

5. The pin will be removed  and 

fixed to the opposite side.”

6. Use a thin blunt instrument to 

remove the top and bottom 
hinge bushes and blanking 
plugs from the doors, take care 
not to mark the door handle. 
Reposition the blanking plugs 
and bushes on the opposite 
side. 

7. Fit the blanking plugs provided into the right hand two centre hinge holes.  

8.  Before changing hinge place from right side to left side, screw on left side panel should be disassemblied and 
after changing hinge place, screw should be assemblied on right side panel.

       

Replacing the doors
1. Slide the top door upwards and locate the top hinge pin into the door bush. Reposition the centre hinge on the 

opposite side.

2. Carefully slide bottom door upward 

into the centre hinge pin.

3. Unscrew the bottom hinge pin and 

refit it on the opposite side..

4. Fit the bottom hinge making sure that 

the door is aligned to the cabinet.

5. Carefully stand the appliance upright 

in it’s required location and make 
sure it is sitting level on the floor. 
Open and close the doors checking 
that the gasket makes a good seal 
without any gaps when the doors are 
closed.

Note: Replace loose items/fittings back 
into the appliance and leave for at least 
15 minutes before switching back on.