Lg Electronics GR-382R ユーザーズマニュアル

1. Install in an appropriate location. 

    Place the refrigerator where it is easily 

2. Avoid placing your refrigerator near heat sources, 

    direct sunshine, or areas of high humidity. 
    

3. There must be an appropriate air flow

    

around your refrigerator in order to get a good

    

performance. If your refrigerator is placed close

    

to the walls, it must have a clearance of 10" 

    on top and 2" on both sides. 
    

The refrigerator must have a 1” clearance from

    

the floor, specially if it’s carpeted.

4. To avoid problems, the refrigerator should be 

    properly leveled. If necessary, adjust the leveling 
    screws.
    The front must be slightly higher than the back so 
    the doors will close properly. 
    The leveling screws are easier to turn if you lean 
    the refrigerator slightly backwards. Turn the 
    leveling screws clockwise to raise the front of the
     refrigerator and counterclockwise to lower it. 

5. Install the refrigerator in a place where the

    

temperature is between 50° F (10°C) and 104° F

    

(40°C). If the temperature is higher or lower, the

    

cooling performance of the appliance can be

    

diminished.

1. Clean your refrigerator and remove dust

    

accumulated during transportation.

2. Install all accessories, such as ice trays, in the 

    correct places. 
    They are packed together to prevent damage 
    

3. Follow the instructions for handle assembly.

    

    

5.  Connect the power cord to the power outlet.

    

Do not connect more than one appliance to the

    

same outlet.

    If your refrigerator's power cord has 3 terminals, 
    DO NOT remove the ground terminal. 
    Grounding minimizes the risk of electric shock. 
    This connector requires a 3-terminal power outlet. 
    If the customer does not have the proper outlet, 
    he must contact a qualified electrician to have the 
    proper outlet installed.  

5. Before using your refrigerator, let it run for 2 or 3 

    hours.
    

Verify the cold air flow at the freezer to ensure 

    

proper cooling. Now your refrigerator is ready to

    

use.

                        

                       

                        

                      

 

  

accessible. 

in transit.

4. After moving the refrigerator, wait an hour 

before plugging it in to allow the oil to settle 

in the compressor.