Liebherr 7085592-01 ユーザーズマニュアル

Risk of injury if repair work is not carried out professionally!

u

Have  any  repairs  and  action  -  not  expressly  specified  -  on

the  appliance  and  mains  cable  carried  out  by  service

personnel only. (see Maintenance)

u

Read  the  appliance

designation

Fig.  11  (1)

,  service

No.

  Fig.  11  (2)

  and

serial  No.

  Fig.  11  (3)

off  the  type  plate

located  inside  the

appliance  on  the  left-

hand side.

Fig. 11 

u

Notify  the  customer  service,  specifying  the  fault,  appliance

designation

 Fig. 11 (1)

, service No.

 Fig. 11 (2)

 and serial No.

Fig. 11 (3)

.

w

This will help us to provide you with a faster and more accu-

rate service.

u

Keep  the  appliance  closed  until  the  customer  service

arrives.

w

The food will stay cool longer.

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

Your  appliance  is  designed  and  manufactured  for  a  long  life

span  and  reliable  operation.  If  a  malfunction  nonetheless

occurs during operation, check whether it is due to a handling

error.  In  this  case  you  will  have  to  be  charged  for  the  costs

incurred, even during the warranty period. You may be able to

rectify the following faults yourself:
Appliance does not work.

→

The appliance is not switched on.

u

Switch on the appliance.

→

The power plug is not properly inserted in the wall socket.

u

Check power plug.

→

The fuse of the wall socket is not in order.

u

Check fuse.

→

The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

u

This is normal in energy-saving models.

→

SuperFrost is activated.

u

The compressor runs for longer in order to rapidly cool the

food. This is normal.

→

The inverter is equipped with a diagnostic LED.

u

The flashing is normal.

→

Due  to  the  various  speed  steps,  speed-regulated*

compressors can generate different running noises.

u

The sound is normal.

→

This noise comes from the refrigerant flowing in the refriger-

ation circuit.

u

The sound is normal.

→

The  noise  is  produced  whenever  the  refrigeration  unit

(motor) automatically switches on or off.

u

The sound is normal.

→

The  refrigeration  increases  automatically  when  the

SuperFrost, function is activated, fresh food has just been

placed in the appliance or the door has been left open for a

while.

u

The sound is normal.

→

The ambient temperature is too high.

u

→

The appliance is not fixed to the ground. The running of the

cooling unit therefore makes objects and adjacent furniture

vibrate.

u

Adjust appliance via the height-adjustable feet.

u

Move bottles and containers apart.

→

There is a fault.

u

Please contact the after-sales service (see Maintenance).

→

Demo mode is activated.

u

Please contact the after-sales service (see Maintenance).

→

The  heat  of  the  refrigeration  circuit  is  used  to  prevent

condensate from forming.

u

This is normal.

→

The door of the appliance is not properly closed.

u

Close the door of the appliance.

→

Insufficient ventilation.

u

Clear ventilation grilles.

→

The ambient temperature is too high.

u

→

The appliance was opened too frequently or for too long.

u

Wait  to  see  whether  the  appliance  reaches  the  required

temperature by itself. If not, please contact the after sales

service (see Maintenance).

→

Too much fresh food was placed inside without SuperFrost.

u

→

The appliance is too close to a source of heat (stove, heater

etc).

u

Change the position of the appliance or the source of heat.

→

The appliance is not switched on.

u

Switch on the appliance.

→

The door was open longer than 15 min.

u

The interior light automatically switches off if the door has

been open for about 15 min.

→

If the interior light is not on but the temperature display is lit,

the bulb is faulty.

u

Change the bulb (see Maintenance).

u

Press  the  On/Off  button

  Fig.  3  (1)

  until  the  display  goes

dark. Release button.

w

If the appliance cannot be switched off, the child lock func-

tion is active .

u

Empty the appliance.