Liebherr F1051 ユーザーズマニュアル

ページ / 18
1.4 Conformity
The  refrigerant  circuit  has  been  tested  for  leaks.  The
appliance  complies  with  the  relevant  safety  regulations
and the directives UL250 and CAN/CSA C22.2 No.63-93.
Instructions for testing institutes:
Tests must be carried out in accordance with the appli-
cable standards and guidelines.
The  preparation  and  testing  of  the  appliance  must  be
carried  out  taking  account  of  the  manufacturer's
loading plans and the instructions in the operating
manual .
1.5 Energy saving
- Always ensure good ventilation. Do not obstruct venti-
lation openings or grilles.
- Do not install the appliance in direct sunlight or next to
an oven, heater, or similar heat source.
- Energy consumption depends on installation conditions
such as the ambient temperature (see 1.3) .
- Avoid  opening  the  appliance  door  for  any  longer  then
neccesary.
- The lower the temperature is set the higher the energy
consumption.
- All food stored in the appliance should be well wrapped
and covered. This prevents frost buildup.
- Only take food out for as long as necessary so that it
does not get too warm.
- Storing hot food: let it cool to room temperature first.
2 General safety information
Read and follow these instructions. They contain
safety  advice  which  is  important  for  safe  and
problem-free  installation  and  operation.  Always
read and follow the safety advice.
Dangers for the user:
-
This appliance can be operated by children 8
years  and  older  as  well  as  by  persons  with
reduced  physical,  sensory  or  mental  capabili-
ties  or  lack  of  experience  and  knowledge  if
they are supervised or have been instructed in
the safe use of the appliance and understand
the  associated  risks.  Children  must  not  play
with the appliance. Cleaning and user mainte-
nance  must  not  be  performed  by  children
unless they are supervised.
-
When  disconnecting  the  appliance  from  the
outlet, always take hold of the plug. Do not pull
on the cable.
-
Disconnect  the  power  plug  or  switch  off  the
power if a fault occurs.
-
Do not damage the mains power line. Do not
operate the appliance from a defective mains
power line.
-
Repairs,  work  on  the  appliance  and  replace-
ment of the power cord should only be carried
out by the customer service department.
-
The  appliance  should  only  be  assembled,
connected and disposed of in accordance with
the instructions.
-
Only install, connect and dispose of the appli-
ance in accordance with the instructions.
-
Only  operate  the  appliance  after  it  has  been
installed.
-
Please keep the instructions and pass them on
to any future owner.
-
All  repairs  to  or  work  on  the  IceMaker  must
only  be  carried  out  by  the  customer  service
department  or  other  specialist  engineers
trained to do this.
-
The  manufacturer  is  not  liable  for  damage
arising from incorrect connection to the water
supply.
Risk of fire:
-
Do  not  operate  the  appliance  near  explosive
gases.
-
Do not store explosive materials or spray cans
with  flammable  propellants,  such  as  e.g.
butane,  propane,  pentane,  etc.  in  the  appli-
ance.  You  can  recognize  such  spray  cans  by
the  printed  contents  or  a  flame  symbol.  Any
leaking  gasses  can  be  ignited  by  electrical
components.
-
Keep  burning  candles,  lamps  and  other
objects with open flames away from the appli-
ance so that they do not set it on fire.
-
Alcoholic  beverages  or  other  containers
holding alcohol must always be tightly sealed
for storage purposes. Any leaking alcohol can
be ignited by electrical components
Tipover hazard:
-
Do  not  stand  or  climb  on  the  base,  drawers,
doors,  etc.  This  applies  in  particular  to  chil-
dren.
Risk of food poisoning:
-
Do not consume food that has passed its best
before date.
Danger  of  frostbite,  feelings  of  numbness
and pain:
-
Avoid  continued  skin  contact  with  the  cold
surfaces or chilled/frozen food or adopt protec-
General safety information
4
* Depending on model and options