Liebherr F1051 ユーザーズマニュアル

- We recommend using a dedicated circuit for this appli-

ance to prevent electrical overload.

- Follow  all  Federal,  State  and  local  electrical,  fire  and

building  codes  and  ordinances  when  installing  the

receptacle and / or the appliance.

- In some communities, a wall switch is required to turn

power to the appliance ON and OFF.

- To  reduce  the  risk  of  fire,  electric  shock,  or  personal

injury,  installation  work  and  electrical  wiring  must  be

done  by  a  qualified  electrician  in  accordance  with  all

applicable  codes  and  standards,  including  fire-rated

construction.

- The Power Plug must be easily accessible so that the

appliance can be disconnected from the mains quickly

in an emergency. It must not be behind the back of the

appliance.

- The  top  of  the  electric  outlet  must  be  located  within

82-5/8  in.  (2100  mm)  from  the  top  of  the  base  in  the

cabinet.

Switch on the appliance 2 hours before loading

with frozen food for the first time.
Do  not  load  frozen  foods  until  the  temperature

display reads 0 °F (-18 °C).
u

Open the door.

u

Press On/Off button

 Fig. 2 (8)

.

w

The  temperature  display  and  the  Alarm  symbol  will

flash  until  the  temperature  is  cold  enough.  If  the

temperature  is  greater  than  32  °F  (0  °C),  flashing

dashes will appear; if the temperature is lower than this,

the current temperature will flash on the display.

w

The interior light comes on when the door is opened.

w

Whenever  “DEMO”  appears  on  the  display,  the  appli-

ance  is  running  in  demonstration  mode.  Contact  the

customer service department.

The temperature display can be changed from °F to °C.

u

Activate  setting  mode:  Press  SuperFrost  button

Fig. 2 (9)

 for about 5 seconds.

w

S

 is displayed in the temperature display.

w

The Menu symbol

 Fig. 2 (3)

 lights up.

u

Using  Up  button

  Fig.  2  (1)

/  Down  button

Fig. 2 (2)

 select 

°

.

u

To  confirm:  Briefly  press  SuperFrost  button

Fig. 2 (9)

.

u

Using  Up  button 

Fig.  2  (1)

/  Down  button

Fig. 2 (2)

 select °F or °C.

u

To  confirm:  Briefly  press  SuperFrost  button

Fig. 2 (9)

.

u

To exit setting mode: Press On/Off button

 Fig. 2 (8)

.

u

Wait 5 minutes.

w

The temperature is again displayed in the temperature

display.

You can adapt the brightness of the temperature display

to the light conditions in the room in which it is installed.
If the door is open or the control panel is used the temper-

ature indicator lights up at maximum brightness. About 1

minute  after  the  door  is  closed  or  no  button  has  been

pressed  on  the  control  panel,  the  temperature  display

goes back to the set brightness.

The  brightness  can  be  set  between 

h0

  (minimum  lumi-

nosity) and 

h5

 (maximum luminosity).

u

To  activate  setting  mode:  Press  SuperFrost  button

Fig. 2 (9)

 for about 5 seconds.

w

S

 is shown on the display.

w

The Menu symbol

 Fig. 2 (3)

 lights up.

u

Using  Up  button 

Fig.  2  (1)

  or  Down  button

  Fig.  2  (2)

select 

h

.

u

To confirm: Briefly press SuperFrost button

 Fig. 2 (9)

.

u

To  set  the  display  brighter:  Press  Up  button

Fig. 2 (1)

.

u

To set the display darker: Press Down button

Fig. 2 (2)

.

u

To confirm: Press SuperFrost button

 Fig. 2 (9)

.

w

The brightness is set to the new value.

u

To  deactivate  setting  mode:  Press  On/Off  button

Fig. 2 (8)

.

u

Wait 5 minutes.

w

The temperature is again displayed in the temperature

display.

You  can  use  the  child-proof  lock  to  lock  the

buttons.  This  means  that  children  cannot  acci-

dentally switch off the appliance when playing.

u

Activate  setting  mode:  press  and  hold  the  SuperFrost

button

 Fig. 2 (9)

 for approximately 5 s.

w

S

 is shown on the display.

w

The Menu symbol

 Fig. 2 (3)

 lights up.

u

Using the Up button

 Fig. 2 (1)

 or Down button

 Fig. 2 (2)

,

select 

c

.

u

Press the SuperFrost button

 Fig. 2 (9)

 briefly to confirm.

When 

c1

 is shown on the display:

u

To  switch  on  the  child-proof  lock,  press  the

SuperFrost button

 Fig. 2 (9)

 briefly.