Liebherr FI1051 ユーザーズマニュアル

w

The SuperFrost button will flash

w

S

 will appear on the display.

u

Using the freezer compartment Up button

 ()

 or freezer

compartment Down button

 ()

, select 

F

.

u

To  confirm:  Briefly  press  the  SuperFrost

  Fig.  2  (9)

button.

w

F0

 will appear on the display.

u

To  confirm:  Briefly  press  the  SuperFrost

  Fig.  2  (9)

button.

w

The filter symbol

 Fig. 2 (5)

 goes out

The NoFrost system defrosts the appliance automatically.
The moisture condenses on the evaporator and is periodi-

cally defrosted and evaporated.

u

The appliance does not need to be defrosted manually.

Danger of electric shock.

u

Unplug refrigerator or disconnect power.

Risk of injury or damage due to hot steam.

Hot  steam  can  cause  scalding/burns  and  damage  to

surfaces.

u

Do not use steam cleaners.

Incorrect cleaning damages the appliance.

u

Do not use concentrated cleaning agents.

u

Do not use steel wool or sponges that scour or scratch.

u

Do  not  use  caustic  or  abrasive  cleaning  materials  or

those containing sand, chloride, chemicals or acids.

u

Do not use chemical solvents.

u

Do not damage or remove the rating plate on the inside

of  the  appliance.  It  is  vital  for  the  customer  service

department.

u

Do  not  pull  off,  kink  or  damage  any  cables  or  other

components.

u

Do not let cleaning water get into the drain gutter, the

ventilation grille and electrical parts.

u

Use soft cleaning cloths and a multi-purpose cleaning

agent with a neutral pH value.

u

Only  use  food-compatible  cleaning  and  care  agents

inside the appliance.

u

u

u

Clean  the  plastic  surfaces,  outside  and  inside,  by

hand  using  lukewarm  water  and  a  little  dish  washing

liquid.

Stainless steel which is exposed to chlorine gas or damp-

ness  may  become  discolored.  This  is  normal.  If  your

appliance is exposed to chlorine gas or dampness, clean

and polish it more frequently. If there are any signs of rust

or  discoloration,  clean  and  polish  the  appliance  as  soon

as possible.*
Do  not  apply  stainless  steel  cleaning  agents  to  glass  or

plastic surfaces so as not to scratch them. Initially darker

areas  and  quite  an  intensive  color  of  the  stainless  steel

surfaces are normal.*

u

If dirty clean external stainless steel surfaces with a

commercially  available  stainless  steel  cleaning  agent.

Then apply the supplied stainless steel cleaning agent

evenly in the direction of the grain.*

u

Clean  fittings  by  hand  using  lukewarm  water  and  a

little dish washing liquid.

u

Wipe the appliance and accessories dry.

u

Connect the appliance and switch it on again.

u

When the temperature is sufficiently cold:

u

put the food back in the appliance.

The IceMaker drawer must be emptied and pushed in.
u

Activate  setting  mode:  press  and  hold  the  SuperFrost

button

 Fig. 2 (9)

 for approximately 5 s.

w

S

 is shown on the display.

w

The Menu symbol

 Fig. 2 (3)

 lights up.

u

Using  the  Up  button

  Fig.  2  (1)

/  Down  button

  Fig.  2  (2)

,

select 

I

.

u

To confirm: press the SuperFrost button

 Fig. 2 (9)

.

u

Using  the  Up  button

  Fig.  2  (1)

/  Down  button

Fig. 2 (2)

, select 

Ic

.

u

To  confirm:  press  the  SuperFrost  button

Fig. 2 (9)

.

w

The  IceMaker  moves  into  cleaning  position  and  shuts

off.

u

Deactivate  setting  mode:  press  the  On/Off  button

Fig. 2 (8)

.

u

Wait 2 min.

w

The temperature is again displayed on the temperature

display.

u

Take out the drawer.

u

Clean  the  ice  compartment  and  drawer  with  warm

water.  If  necessary,  use  a  mild  dishwashing  liquid.

Then rinse.

u

Slide the drawer back in.

If dishwashing liquid was used:

u

Throw out the first three batches of ice cubes to get rid

of any dishwashing liquid residues.

Either leave the IceMaker switched off in this position or