Liebherr 7081998-0 ユーザーズマニュアル

Apart from being able to remove the

drawers,  you  can  also  remove  the

shelves,  creating  space  for  large

items  of  frozen  food.  Poultry,  meat,

large  pieces  of  game  and  high

bakery  products  can  be  frozen  in

one piece and prepared.

u

The maximum load of frozen food

for the drawers is 25 kg each and

for the shelves 35 kg each.

The  layer  of  frost  or  ice  builds  up  faster  if  the  appliance  is

opened  often  or  if  the  food  is  warm  when  placed  inside.

However,  a  thick  layer  of  ice  will  increase  the  appliance‘s

energy  consumption.  You  should  therefore  defrost  the  appli-

ance regularly.

Risk of injury and damage as a result of hot steam!

u

Do not use electric heaters or steam cleaners, naked flames

or defrosting sprays for defrosting.

u

Do not remove ice using sharp instruments.

u

Switch on SuperFrost one day before defrosting.

w

The frozen goods are provided with a "cold reserve".

u

Switch off the appliance.

w

The temperature display goes out.

u

Pull out the power plug or switch off the fuse.

u

If  possible,  put  the  frozen  goods  in  the  freezer  drawer,

wrapped  in  newspaper  or  a  blanket,  and  store  in  a  cool

place.

u

Place  a  pan  with  hot,  not  boiling

water on a middle shelf.

u

Half-fill  the  two  lower  drawers  with

lukewarm water and put them in the

appliance.

w

Defrosting is speeded up.

w

Defrost water is collected in the drawers.

u

Leave the door of the appliance open while defrosting.

u

Remove detached pieces of ice.

u

If  necessary,  pick  up  defrost  water  several  times,  using  a

sponge or cloth.

u

Clean the appliance (see 6.2) .

Risk of injury and damage as a result of hot steam!

Hot steam may damage the surfaces and cause burns.

u

Do not use any steam cleaners!

Incorrect cleaning damages the appliance!

u

Do not use cleaning agents in concentrated form.

u

Do not use any scouring or abrasive sponges or steel wool.

u

Please  do  not  use  any  aggressive,  scouring,  sand-,

chloride-, chemical- or acid-based cleaning agents.

u

Do not use chemical solvents.

u

Do not damage or remove the type plate on the inside of the

appliance. It is important for the customer service.

u

Do  not  pull  off,  bend  or  damage  cables  or  other  compo-

nents.

u

Do not allow any cleaning water to enter the drain channel,

ventilation grille or electrical parts.

u

Please  use  soft  cleaning  cloths  and  a  universal  pH-neutral

cleaning agent.

u

Please use cleaning and care products suitable for contact

with foodstuffs in the appliance interior.

u

u

u

Clean  plastic  outer  and  inner  surfaces  with  lukewarm

water and a little washing-up liquid.

u

Wipe dry the appliance and items of equipment.

u

Connect the appliance and switch it on again.

First check whether you can correct the fault yourself by refer-

ence to the list (see Malfunction). If this is not the case, please

contact  the  customer  service  whose  address  is  given  in  the

enclosed customer service list.

Risk of injury if repair work is not carried out professionally!

u

Have  any  repairs  and  action  -  not  expressly  specified  -  on

the  appliance  and  mains  cable  carried  out  by  service

personnel only. (see Maintenance)

u

Read  the  appliance

designation

Fig.  7  (1)

,  service

No.

  Fig.  7  (2)

  and

serial  No.

  Fig.  7  (3)

off  the  type  plate

located  inside  the

appliance on the left-

hand side.

Fig. 7 

u

Notify  the  customer  service,  specifying  the  fault,  appliance

designation

 Fig. 7 (1)

, service No.

 Fig. 7 (2)

 and serial No.

Fig. 7 (3)

.

w

This will help us to provide you with a faster and more accu-

rate service.

u

Keep  the  appliance  closed  until  the  customer  service

arrives.

w

The food will stay cool longer.

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

Your  appliance  is  designed  and  manufactured  for  a  long  life

span  and  reliable  operation.  If  a  malfunction  nonetheless

occurs during operation, check whether it is due to a handling

error.  In  this  case  you  will  have  to  be  charged  for  the  costs