Morphy Richards Hot Beverage Maker ユーザーズマニュアル
4
BEFORE FIRST USE
Before using the appliance for
the first time, fill with water, boil
and pour away.
the first time, fill with water, boil
and pour away.
OPERATING THE
APPLIANCE
APPLIANCE
1
Wherever possible fill through
the spout, as this helps to free
the filter from limescale build-
up.
the spout, as this helps to free
the filter from limescale build-
up.
•
The integrated water level
indicators allow you to easily
see the amount of water in the
kettle.
indicators allow you to easily
see the amount of water in the
kettle.
•
Ensure that you put the
minimum requirement of water
in the kettle, 1 cup 25cls.
minimum requirement of water
in the kettle, 1 cup 25cls.
•
Boil only as much water as you
need as this saves electricity.
need as this saves electricity.
2
Place the appliance on the base
unit, ensuring the appliance
locates on to the 360˚
connector.
unit, ensuring the appliance
locates on to the 360˚
connector.
•
The 360˚ connector allows the
appliance to be located at any
position. - ideal for left and right
handed users and convenient
positioning on worktop.
appliance to be located at any
position. - ideal for left and right
handed users and convenient
positioning on worktop.
3
Plug in and switch on at the wall
socket.
socket.
4
Switch the appliance on.
5
When the water boils the
appliance will switch off
automatically.
appliance will switch off
automatically.
•
If you are using the appliance
for the first time, pour away the
boiled water and refill.
for the first time, pour away the
boiled water and refill.
6
Lift the appliance from the base
unit by the handle ensuring you
hold the appliance level.
unit by the handle ensuring you
hold the appliance level.
•
To re-boil, switch to ON again. If
the appliance has just switched
off wait a minute or so before
switching it back on again.
the appliance has just switched
off wait a minute or so before
switching it back on again.
•
If you do not put in enough
water, or switch on the
appliance when it is empty, the
safety cut-out will switch off the
power automatically. If this
happens, refill and wait a few
water, or switch on the
appliance when it is empty, the
safety cut-out will switch off the
power automatically. If this
happens, refill and wait a few
minutes for the element to cool,
then use as normal.
then use as normal.
Filter removal
1
Open the lid.
2
Lift the filter upwards from its
location using the tab provided.
location using the tab provided.
3
To refit the filter, slot it into the
side wall guides and press
down firmly. Ensure the filter is
correctly located into the central
guide.
side wall guides and press
down firmly. Ensure the filter is
correctly located into the central
guide.
WARNING: Make sure
that the lid is put in
correctly otherwise it
will not close.
that the lid is put in
correctly otherwise it
will not close.
UK Helpline 0870 060 2611
Replacement Parts 0870 167 6642
Ireland Helpline 1800 409119
43068 rev2 5/6/06 14:51 Page 6