Mellerware 3 3 0 0 1 ユーザーズマニュアル

HOW TO OPERATE YOUR KETTLE
It is important that you read these instructions 

before using your kettle for the first time.

1. Open the lid of the kettle by pulling the lid 

trigger, fill with tap water to the desired level. 
(Min. capacity is 0.5L and max. capacity is 1.0L).  
In hard water areas, using purified or filtered 
water is recommended to reduce the amount of 
scale build up in the kettle.

2. Close the lid by releasing the lid trigger.  Place 

the kettle on the base and plug into the mains. 

3. To switch on the kettle, press the On/Off switch 

up (position 1).  The power indicator light will 
now be on.  When the water has boiled the 
kettle will automatically switch off.  You can stop 
the kettle at any time by pressing the On/Off 
switch down (position 0).  

4. Pour slowly and carefully.  If you wish to re-boil, 

please allow a few minutes for the kettle to cool 
down.

    IMPORTANT:  Do not open the lid when steam 

is coming out of the spout. Before pouring or 
filling always remember to disconnect from 
electricity.

Note: If the kettle is switched on when empty or 

with insufficient water, then the kettle will switch 
off automatically to protect against dry boiling.  
Wait until the heating element cools down, 
refill with tap water and use as normal.  This 
protection function is not designed for regular 
use, as it will shorten the life of the kettle.

If the kettle is overfilled, boiling water may be 
ejected.

The kettle is only to be used with the stand/base 
provided.

The appliance must not be immersed during 
cleaning.

If the supply cord is damaged, the manufacturer 
or its service agent or a similarly qualified person 
must replace it in order to avoid a hazard.

1.  Flip Top Lid
2.  Lid Trigger
3.  Handle
4.  On/Off Switch
5.  Stand/Base
6.  Water Level Indicator
7.  Body
8.  Spout

1

8

6

7

2

3

4

5