Frigidaire FPHI2188PF ユーザーズマニュアル

10

Turning the refrigerator/freezer temperature control 

to “0” turns off the compressor and prevents the 

refrigerator from cooling, but does not disconnect 

the power to the light bulb and other electrical 

components. To turn off power to your refrigerator, 

you must unplug the power cord from the wall outlet.



When first turning refrigerator on, move control(s)

to Normal. This is the recommended initial setting. 

After 24 hours, adjust the controls as needed.

Your ice maker is shipped from the factory with 

the wire signal arm in the ON position. To ensure 

proper function for your ice maker, hook up water 

supply immediately or turn ice maker OFF by 

lifting the wire signal arm until it clicks and locks 

in the UP position. If the ice maker is not turned 

off and the water supply is not connected, the 

water valve will make a loud chattering noise.

Normal

Colder

Cold

Normal

Cold

Colder

•  Adjust temperature gradually: move the knob 

in small increments, allowing the temperature 

to stabilize.

Turning the refrigerator/freezer control will change 

temperatures in both compartments. The auxiliary 

freezer control has no effect on electrical power to 

the refrigerator.
To maintain temperatures, a fan circulates air in the 

refrigerator and freezer compartments. For good 

circulation, do not block cold air vents with food items.

If your refrigerator has an automatic ice maker, 

no ice will be produced during the first 24 hours

of operation. Air in new plumbing lines may cause 

the ice maker to cycle two or three times before 

making a full tray of ice. With no usage, it will take 

approximately one to two days to fill the ice container.
New plumbing connections may cause the first

production of ice cubes to be discolored or have an 

odd flavor. Discard ice made during the first 24 hours.

After the plumbing connections have been 

completed, the water supply valve must be 

opened. Place the ice container under the ice 

maker, pushing it as far back as possible. Lower 

the wire signal arm to its “down” or ON position.

To stop the ice maker, lift the wire signal arm until 

it clicks and locks in the “up” or OFF position. The 

ice maker also turns off automatically when the 

ice container is full.



Automatic ice makers are also optional accessories 

that may be installed in most models at any time. 

Call your local dealer for information.

Wire

Signal Arm

To ensure safe food storage, allow the refrigerator 

to operate with the doors closed for at least 8 to 

12 hours before loading it with food.