Frigidaire FPHI2188PF ユーザーズマニュアル

4



If your refrigerator is placed with the door 

hinge side against a wall, you may have to 

allow additional space so the door can be 

opened wider.



Raise the front of the refrigerator enough so 

the doors close freely when opened halfway. 

The refrigerator should slope ¼” to ½” from 

front to back. Then level the refrigerator from 

side-to-side.

Do Not install the refrigerator where the 

temperature will drop below 55°F (13°C) or rise 

above 110°F (43°C). The compressor will not 

be able to maintain proper temperatures inside 

the refrigerator.
Do Not block the toe grille on the lower front of your 

refrigerator. Sufficient air circulation is essential for

the proper operation of your refrigerator.

This Use & Care Guide provides general operating 

instructions for your model. Use the refrigerator 

only as instructed in this Use & Care Guide. Before 

starting the refrigerator, follow these important 

first steps.

•  Choose a place that is near a grounded 

electrical outlet. Do Not use an extension cord 

or an adapter plug.

•  If possible, place the refrigerator out of direct 

sunlight and away from the range, dishwasher 

or other heat sources.

•  The refrigerator must be installed on a floor

that is level and strong enough to support a 

fully loaded refrigerator.

•  Consider water supply availability for models 

equipped with an automatic ice maker. If

you do not hook up water to the refrigerator, 

remember to turn the ice maker off.

•  Allow the following clearances for ease 

of installation, proper air circulation, and 

plumbing and electrical connections:

Sides & Top

⅜ inch

 Back 

 1 

inch

All four corners of your refrigerator must rest 

firmly on a solid floor. Your refrigerator is equipped

with adjustable front rollers or front leveling 

screws to help level your unit.

Raise

Raise

refrigerator:
 1.  Remove 

toe grille.

2.  Use flat-

blade 

screwdriver 

or ⅜”

socket 

wrench to 

adjust front rollers. Use adjustable wrench to 

adjust leveling screws.