Gaggenau rc 462/413 rf 411/413 rf 461/463 rf 471 rw 414/464 ユーザーズマニュアル

ã

Caution when pushing the appliance into the 

installation niche. Do not damage the water line or 

power cord.

Note:
When the floor or the appliance is not leveled in 

comparison to the installation niche adjust height 

adjustable wheels before you move the appliance into the 

installation niche.
1. Remove the base panel.
2. Raise the height-adjustable wheels at the back 

by approx. 

3

/

8

" (9.5 mm).

3. Put the electric plug into the socket.
4. Push the water line into the guard tube (a) at the rear 

of the appliance.

ã

The appliance may tilt when the water connection 

line is inserted into the protective pipe (a)!

5. Prevent the power cord from becoming caught.

Tie a piece of string to the middle of the power cord 

and feed forwards over the top of the appliance. 

When pushing in the appliance, pull the cable 

upwards. Take care not to pinch the power cord.
or
Using adhesive tape, tape the power cord to the floor 

centrally behind the appliance approx. 15" (380 mm) 

away from the rear panel of the installation niche.

6. Carefully push the appliance into the installation 

niche.

7. Remove edge protection (if attached).