Insys MoRoS ISDN 1.1.1 11-02-06-02-01.005 ユーザーズマニュアル
製品コード
11-02-06-02-01.005
MoRoS Modem/ISDN
Configuration
June 06
11
5 Configuration
The configuration of the MoRoS takes place via a network connection between MoRoS
and a PC.
and a PC.
Configuration requirements:
¾
a PC with network card.
¾
an Internet browser (e.g. Mozilla Firefox, Opera, Konqueror or Internet Explorer).
The operating system of the PC is irrelevant for the configuration. The operating system
must support TCP/IP, it must be possible to use the built-in network card, and a web
browser must be installed.
must support TCP/IP, it must be possible to use the built-in network card, and a web
browser must be installed.
After the configuration is completed, the web interface could also be accessed via a dial-
up connection. Dial-In must be activated for this action. For the remote configuration,
the notes in the pertinent chapters regarding the individual configuration steps must
absolutely be observed.
up connection. Dial-In must be activated for this action. For the remote configuration,
the notes in the pertinent chapters regarding the individual configuration steps must
absolutely be observed.
5.1 PC Setup
To enable the communication between the PC and the MoRoS, both devices must be
present in the same network. Depending on the operating system, the steps for the
network settings will differ.
present in the same network. Depending on the operating system, the steps for the
network settings will differ.
The MoRoS has a DHCP server. It is activated by default. The network configuration
should usually take place automatically.
should usually take place automatically.
If the automatic configuration doesn't work, the following chapters will help you to
manually configure the network settings.
manually configure the network settings.
This is a summary for the PC settings:
1. the IP address must be in the network 192.168.1.X , for example
192.168.1.2; 192.168.1.1 is the IP address of the MoRoS and may
not be used.
not be used.
2. the network mask must read: 255.255.255.0
3. the gateway address must read: 192.168.1.1
3. the gateway address must read: 192.168.1.1
The MoRoS may now be accessed via a browser at the IP address 192.168.1.1.
5.1.1 Windows XP
The Windows XP settings can be accessed via the Explorer (right mouse button on “Start”
-> Explore).
-> Explore).