GE JKP3027 ユーザーズマニュアル
Changing the Speed of the + or – Pads
(on some models)
As you use the + or – pads when setting a
time or temperature, you may notice the display
changes slowly. This special feature allows you
to change the speed. To set the speed you prefer,
follow the steps below.
time or temperature, you may notice the display
changes slowly. This special feature allows you
to change the speed. To set the speed you prefer,
follow the steps below.
Press the Bake and Broil Hi/Lo pads
(on double oven models, use the
upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
(on double oven models, use the
upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
Press any + pad. The display will
show you a set speed between 1
and 5.
show you a set speed between 1
and 5.
Press any + pad to increase the
speed up to the number 5.
speed up to the number 5.
Press any – pad to decrease the
speed down to the number 1.
speed down to the number 1.
Press Start to activate the setting and
leave the control set in this special
features mode.
leave the control set in this special
features mode.
ge.com
19
Auto Recipe
™
Conversion
(on some models)
When using convection bake, the Auto Recipe
™
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
entered regular baking temperatures to
convection baking temperatures.
Once the feature is activated, the display
will show the actual converted (reduced)
temperature. For example, if you enter a regular
recipe temperature of 350°F and press the
Start pad, the display will show CON and
the converted temperature of 325°F.
will show the actual converted (reduced)
temperature. For example, if you enter a regular
recipe temperature of 350°F and press the
Start pad, the display will show CON and
the converted temperature of 325°F.
NOTE: This feature does not convert convection
bake cooking times, only regular baking
temperatures.
bake cooking times, only regular baking
temperatures.
To activate the feature:
Press the Bake and Broil Hi/Lo pads
(on double oven models, use the
upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
(on double oven models, use the
upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
Press the Convection Bake pad. The
display will show CON OFF. Press the
Convection Bake pad again. The
display will show CON ON.
display will show CON OFF. Press the
Convection Bake pad again. The
display will show CON ON.
Press the Start pad.
To deactivate the feature, repeat steps
1–3 above but press the Start pad when
CON OFF is in the display.
1–3 above but press the Start pad when
CON OFF is in the display.
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Your control will allow you to lock out the press
pads so they cannot be activated when pressed.
pads so they cannot be activated when pressed.
NOTE: On double ovens with press pad
controls for both ovens, this activates this
feature for both ovens.
controls for both ovens, this activates this
feature for both ovens.
To lock/unlock the controls:
Press the Hour and Min – pads or
the 9 and 0 pads (depending on
model) at the same time for 3
seconds until the display shows
LOC ON.
the 9 and 0 pads (depending on
model) at the same time for 3
seconds until the display shows
LOC ON.
To unlock the control, press the
Hour and Min – pads or the 9 and 0
pads (depending on model) at the
same time for 3 seconds until the
display shows LOC OFF.
Hour and Min – pads or the 9 and 0
pads (depending on model) at the
same time for 3 seconds until the
display shows LOC OFF.
When this feature is on and the press
pads are pressed, the control will beep
and the display will show LOC ON.
pads are pressed, the control will beep
and the display will show LOC ON.
■
The control lockout mode affects all press
pads. No press pads will work when this
feature is activated.
pads. No press pads will work when this
feature is activated.
■
On models with oven knob(s), this feature is
not available for the lower oven.
not available for the lower oven.
■
This adjustment will be retained in memory
after a power failure.
after a power failure.
Control Lockout
or
(depending on model)
+
or
+