Electrolux TINSEB425MRRO ユーザーズマニュアル

ページ / 120
6
Unpacking & Installation Instruction
UNPACKING AND EXAMING YOUR 
OVEN
1.  Remove all packing materials from inside the 
oven cavity. 
Do not remove the Waveguide 
Cover, which is located on the right cavity wall. 
Read and SAVE this Use and Care Guide and 
the High Speed Convection Microwave Oven 
Cookbook.
2.  Remove the feature sticker, if there is one, from 
the outside of the door.
  Check  the  oven  for  any  damage,  such  as 
misaligned or bent door, damaged door seals 
and  sealing  surfaces,  broken  or  loose  door 
hinges and latches and dents inside the cavity 
or on the door. If there is any damage, do not 
operate  the  oven  and  contact  your  dealer  or 
ELECTROLUX AUTHORIZED SERVICER.
CHOOSING A LOCATION FOR YOUR 
OVEN
You  will  use  your  oven  frequently,  so  plan  its 
location  for  ease  of  use.  The  oven  must  be 
placed on a countertop which is a minimum of 
36 inches from the floor. Allow at least 2 inches 
on the sides, top and at the rear of the oven for 
air circulation. Be sure to position oven so that 
the rear cannot be touched inadvertently.
Your  oven  can  be  built  into  a  cabinet  or 
wall  by  itself  or  above  the  electric  wall  oven 
E30EW75DSS1.
Note for built-in kits:
See sketch 1 for proper location when building 
in  above  the  specified  wall  oven.  Carefully            
follow the wall oven installation instructions. Be 
sure that the clearance of the floor between the 
wall oven and the high speed oven is minimum 
of 3 inches.
Door hinges
Safety door latches
Waveguide cover
Door seals and
sealing surfaces
MIN.
3"
Electric Wall Oven
MIN.
36"
SKETCH 1