Electrolux B 89092-4 ユーザーズマニュアル

19

The Oven Electronic Control does a continuous
diagnostic check of the system. If some
parameters are not correct, the control unit
will stop the activated functions and the
corresponding error code will be displayed.

You can choose to make The Electronic Control
beep each time that a control is touched.
To enable this function, the oven must be off.

1. Press controls 

 and 

 at the same time

for about 3 seconds. The Electronic Control
beeps once (Fig. 22).

1. If the oven is on, touch control 

 to switch

it off.

2. Press controls 

 and 

 at the same time

for about 3 seconds. The Electronic Control
beeps once

Some recipes have been stored into the Oven
Electronic Control memory to allow you to cook ten
different dishes using pre-set cooking functions,
temperatures and cooking times.
The available recipes are listed at the bottom of the
following page.

To choose a recipe:

1. Touch the ON/OFF control 

 to switch on

the oven;

2. Touch the "Recipe Selection Function" control

 : the upper section of the display will show

the name of the recipe, and symbol   will
come on near the "Cooking Duration" symbol

. This means that a cooking duration is

already set in the memory. The lower section
will show the symbol of the pre-set cooking
function and the pre-set cooking temperature.
Symbol " " will flash at the right hand of the
temperature display. (Fig. 23).