Electrolux E30EW75DSS ユーザーズマニュアル

1.

Press 

 or 

. "0:00" will appear in the display (Figure 5).

2.

Press the number pads to set the desired time in the display (example 

).

Press 

 or 

. The time will begin to count down with "5:00" (Figure 6).

Note: If 

 or 

 is not pressed the timer will return to the time of day.

3.

When the set time has run out, "End" will show in the display (Figure 7). The

clock will sound with 3 beeps every 15 seconds until 

 or 

 is pressed.

Press 

 or 

.  The display will return to the time of day.

The 

 or 

 and 

 or 

 pads control the Continuous Bake or 12 Hour Energy

Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving
feature that will shut off the oven if the oven control is left on for more than 11 hours and
59 minutes. The oven can be programmed to override this feature for Continuous Baking.

1.

Press and hold 

 or 

 for 8 seconds (Figure1). "12Hr" or "- -Hr" will appear

in the display and the control will beep once.

2.

Press 

 or 

 to switch between the 12 Hour Energy Saving and continuous

bake features. Note: "12Hr" in the display indicates the control is set for the 12
Hour Energy Saving mode and "- -Hr" indicates the control is set for the
Continuous Bake feature (Figures 2 and 3).

3.

Press 

 or 

 to accept the change (Figure 4; display will return to time of

day) or press 

 or 

 to reject the change.

The 

 or 

 pad controls the Timer feature. The Timer serves as an extra timer in the

kitchen that will beep when the set time has run out. It does not start or stop cooking. The
Timer feature can be used during any of the other oven control functions.

Figure 5

Figure 6

Figure 7

Figure 1

Figure 2

Figure 3

Figure 4