Insys GSM 4.2 I4 11-02-01-03-01.038 ユーザーズマニュアル
製品コード
11-02-01-03-01.038
INSYS GSM 4.2 I4
Functions and their configuration
Dez-06
45
SMS messages, where the content is an alarm message saved in the device (ac-
knowledgement of alarms).
If the SMS message can not be used by the device, the device will immediately delete it
from the memory. The GSM engine is operated in the operation mode AT+CMGF=1 (SMS
text mode).
from the memory. The GSM engine is operated in the operation mode AT+CMGF=1 (SMS
text mode).
SMS processing through the application
The device will not delete unknown SMS messages if in the HSComm software in the tab
"Basic settings" in the group "GSM connection" the check box "Leave remote SMS in SIM
buffer" is marked. End device applications can therefore use these SMS messages. (Oper-
ating mode AT**SMSRX=2),
The SMS which are not processed by device stay in the buffer of the SIM card until they
are retrieved by the application via the serial interface, and deleted.
The device will not delete unknown SMS messages if in the HSComm software in the tab
"Basic settings" in the group "GSM connection" the check box "Leave remote SMS in SIM
buffer" is marked. End device applications can therefore use these SMS messages. (Oper-
ating mode AT**SMSRX=2),
The SMS which are not processed by device stay in the buffer of the SIM card until they
are retrieved by the application via the serial interface, and deleted.
Note
When the buffer of the SIM card is full, no further SMS messages
will be accepted:
When the buffer of the SIM card is full, no further SMS messages
will be accepted:
Suggested solution for buffer overflow:
1.
Assign a configuration password.
The device can then edit and delete all SMS messages with this password. The ap-
plication can edit and delete all other SMS messages.
plication can edit and delete all other SMS messages.
2.
Select a query cycle of the application that is larger than the one of the device (e.g.
factor 2-3). Otherwise the device will re-trigger its query cycle every time the ap-
plication is queried (= activity at the RS232 interface).
factor 2-3). Otherwise the device will re-trigger its query cycle every time the ap-
plication is queried (= activity at the RS232 interface).
Note
If the query cycle is triggered frequently, for example due to activity
at the RS232 interface, this may result in the device being no longer
able to start a query of the SMS input buffer.
If the query cycle is triggered frequently, for example due to activity
at the RS232 interface, this may result in the device being no longer
able to start a query of the SMS input buffer.
Procedure
To activate automatic SMS processing in the software HSComm, set a check mark in the
check box "Automatic SMS processing" in the tab "Basic settings" in the group "GSM con-
nection".
To activate automatic SMS processing in the software HSComm, set a check mark in the
check box "Automatic SMS processing" in the tab "Basic settings" in the group "GSM con-
nection".
Pertinent AT commands
AT**SMSRX
Automatic SMS reception processing
6.2.4 Commands via SMS
Most of the extended AT** commands as well as commands for querying the alarm in-
puts can be transferred via SMS to the device. Responses can be sent back via SMS to a
user-defined number.
Syntax for extended AT commands via SMS:
[<password>,]<command>[,CN: <reply>]
puts can be transferred via SMS to the device. Responses can be sent back via SMS to a
user-defined number.
Syntax for extended AT commands via SMS:
[<password>,]<command>[,CN: <reply>]