Graco 3A0237L ユーザーズマニュアル
Installation
3A0237L
17
Connect Heated Hoses
1.
Lay heated hoses end to end, matching the color
coding. Red for component A (ISO), blue for compo-
nent B (RES).
coding. Red for component A (ISO), blue for compo-
nent B (RES).
2.
Connect fluid hoses (A, B).
3.
Connect signal cables (13).
NOTE: Do not connect the main air supply to the air
hose at this time.
hose at this time.
4.
Connect air hoses (C).
5.
Connect electrical wires (D).
a.
Ensure electrical wires ends are 5/8 in.
(0.625mm) long. If they are not, use a sharp
scissors to strip all four wire ends to the correct
length. See Strip Length Gauge for correct
length.
(0.625mm) long. If they are not, use a sharp
scissors to strip all four wire ends to the correct
length. See Strip Length Gauge for correct
length.
F
IG
. 3
F
IG
. 4
A
B
TI14731a
TI14732a
B
A
13
F
IG
. 5
F
IG
. 6
C
TI14733a
D
Single Heat Zone with A and B Heated Hose
Dual Heat Zone with A and B Heated Hose
TI15097a
C
D
D
Single Heat Zone with A or B Heated Hose
C
D
D
TI15140a
Strip Length
5/8 in.
TI9733a
(0.625 mm)
This illustration is not to scale.