Hitachi EC 129 ユーザーズマニュアル

— 10 —

Model

EC129

Motor

Single-Phase, Induction Motor

Power Source

Single-Phase, 120V AC 60Hz

Output Power

2.5 HP

 (1.8 KW)

Current

15.0 A

Tank Capacity

5 gal.

 (18.9 ltr)

Maximum Pressure

125 PSI

(8.6 bar)

at 40 PSI

6.0 CFM

(2.8 bar)

 (170 ltr/min)

at 90 PSI

4.7 CFM

(6.2 bar)

 (133 ltr/min)

at 100 PSI

4.4 CFM

(6.9 bar)

 

(125 ltr/min)

Lubrication

Oil

Free Air
Delivery

2. Power switch

Ensure that the knob of the pressure switch is in the
“OFF” position (Fig. 2). If the plug is connected to a
receptacle while the knob is in the “ON” position, the
compressor will start operating immediately and can
cause serious injury.

Fig. 2

3. Extension cord

When the work area is far away from the power
source, use an extension cord of sufficient thickness
and rated capacity (refer page 7). The extension cord
should be kept as short as practicable.

4. Confirm the power receptacle

If the power receptacle only loosely accepts the plug,
the receptacle must be repaired. Contact the nearest
electric store for repair service.
If such a faulty receptacle is used, may cause
overheating, resulting in a serious hazard.

Knob of the pressure switch

Dipstick ............................... 1

䡬 Air source of the pneumatic nailer and stapler.

1. Power source

Ensure that the power source to be utilized conforms
to the power source requirements specified on the
product nameplate.

e_ec129_e.p65

4/8/04, 5:38 PM

10