KitchenAid 4452828 ユーザーズマニュアル

Turn power supply off. Move oven

close to final position.

•  Remove and discard shipping materials,

tape and protective film from the oven.

•  Remove and set aside racks and other

parts from inside oven.

Remove the drawer:

•  Pull drawer to its full open position.

•  Press tab down on right and lift tab

upward on left, then slide drawer out
about 1 inch.

•  Carefully remove the drawer from the

slides holding on to the sides, not the
drawer front.

•  Set drawer aside on protected surface.

Carefully support the oven in front

of the cutout. Make sure the power to the
outlet is turned off and that the warming
oven power switch is set to the "OFF"
position.

•  Plug the power supply cord into the

grounded outlet.

•  Slide the oven into the cutout.
•  Carefully push against the seal area of

the oven front frame and slide the oven
completely into the cabinet until the
front frame is positioned flush against
the cabinet face.

Use two (2) screws provided to

secure the warming oven frame to the
cabinet.

Replace the drawer:

•  Align the drawer guides with the

receiving slides.

•  Push drawer in completely. Gently open

and close drawer to ensure it is seated
properly on the slides.

Refer to the "Use and Care

Guide," turn the oven on and check the
oven's operation.