Wind Crest WSL487 プリント

Install Quick Specs are for planning purposes only. Please refer to the detailed installation instructions, prior to
making any cutouts

Wall Mounted Hoods – Install Quick Specs

WSL Series Hoods - 27” Depth (cont.)

Maximum Power Supply Required*
15 Amps @ 120 V AC, 60 Hz
20 Amps @ 120 V AC, 60 Hz (when used with
VEN150E remote ventilator)
*Electrical rating is maximum required for any
combination of ventilator, lighting and heat
lamps.

Outdoor Electrical Requirements
Damp outdoor installations require a fault
interrupter circuit connection.

Hood Lighting Rating
• 30” to 48” widths: 100 watts w/halogen

lights or 600 watts w/halogen + heat lamps

• 54” and 60” widths: 200 watts w/halogen

lights or 700 watts w/halogen + heat lamps

Ventilator Options
640 CFM, Internal Blower: VEN060I**
1000 CFM, Remote Blower: VEN100E
1500 CFM, Remote Blower: VEN150E

Ventilator Motor Ratings
VEN060I: 2.8 Amps @ 120 V AC, 60 Hz**
VEN100E: 8 Amps @ 120 V AC, 60 Hz
VEN150E: 12 Amps @ 120 V AC, 60 Hz

**Two VEN060I internal ventilators can be
installed in WSL hoods 48” or wider. This
installation requires part #10220 dual wire
harness. Refer to the installation instructions
for full details.

Ventilator Dimensions & Accessory
Transitions (see Ventilator section)

CUSTOMER SPECIFICATION:
Hood Width Specified & finish:
(e.g.WSL304S)
Add Keep Hot Lamps: (e.g. WSL304SH)
Add Special Edge Finish to Stainless
Models: (i.e. WSL304SHSPC)

Accessories Selected: (e.g. Back splash with
racks, chrome or brass rails, canopy
extensions)

12"

6", 12"

= wi

dth

of h

ood

Chrome/Brass
Rolled Pot Rail

Center Support
48, 54, 60" Models

1-7/8"

3/4"

Final Hood Model Selected:

Add Any Accessories:

Specify Ventilator Selected & Transitions:

“CE” Canopy Extensions (6” or 12” height) for

WSL hoods