AEG 1400 D ユーザーズマニュアル

45

• The hood is supplied as an extractor unit and can also be used with

a filtering function by fitting one charcoal filter (special accessory).

• You will need original AEG charcoal filter for this function (see

Special Accessories).

• The unit features two outlet holes, one of which A is located on the

top of the unit while the other B is located on the rear.

• To connect up the hose, you should first fit the bayonet-mounting

flange C (Ø 120 mm) on the outlet required (if using the top outlet, fix
the flange in place using the screw supplied as shown in Fig. 1).
Close off the unused hole using the bayonet fitting caps D.

• Warning! If is decided to use the rear outlet hole B, first remove the

sponge E that closes that hole. Fig. 2.

• The air is filtered and recirculated

through the front grid.

•

Move the lever G to position F -

Fig. 3.

• You will need an original AEG

KF14 charcoal filter for the filtering
function. (See Special
Accessories).