Jenn-Air LI3URB/W10274314C ユーザーズマニュアル
11
Make Electrical Connection
1. Disconnect power.
2. Remove the 5 screws from the top cover of the range hood to
uncover the terminal box.
3. Remove terminal box cover and the knockout. Install a UL
listed or CSA approved ½" strain relief.
4. Run home power supply cable through strain relief into the
terminal box.
5. Use UL listed wire connectors and connect black wires (C)
together.
6. Use UL listed wire connectors and connect white wires (E)
together.
7. Connect green (or bare) ground wire from home power supply
to yellow-green ground wire (E) in terminal box using UL listed
wire connectors.
wire connectors.
8. Tighten strain relief screw.
9. Install terminal box cover.
10. Check that all light bulbs are secure in their sockets.
11. Reinstall top cover using 5 screws removed previously.
Tighten screws.
12. Reconnect power.
A. Cover screws
A. Top cover
A. Top cover
A. Knockout
B. Terminal box cover
B. Terminal box cover
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
A
B
A
A
A
B
A. Home power supply cable
B. UL listed or CSA approved strain relief
B. UL listed or CSA approved strain relief
C. Black wires
D. UL listed wire connectors
D. UL listed wire connectors
E. White wires
F. Green (or bare) and yellow-green ground wires
F. Green (or bare) and yellow-green ground wires
A
B
C
D
E
F
WARNING
Electrical Shock Hazard
Electrically ground blower.
Connect ground wire to green and yellow ground wire
in terminal box.
in terminal box.
Failure to do so can result in death or electrical shock.