Kenmore 31130 ユーザーズマニュアル

9

2.  Choose the opening:

HO0142

 

  Using a Robertson or a Phillips no. 2 screwdriver, remove 

the 4 top metal plate retaining screws in order to clear the 

vertical discharge opening (see illustration beside). Discard 

the metal plate and its screws.

 

  In order to ease a retrofi t installation, the horizontal discharge 

may be positioned on higher OR on lower back of the hood. 

From outside the unit, remove the knockout for the chosen 

discharge opening (see illustrations beside).

HR0038

1.  Lay the hood on its back on a table. 
 Remove 

grease 

fi lters by lifting the metal latch tab (1), 

pushing down on the fi lter (2) and tilting is towards you (3).

HD0376

 NOTE
  Use a piece of cardboard to avoid damaging the table or the 

hood.