Philips RTH718 ユーザーズマニュアル
English
16
Step 1: Basic Recorder Connections
A. Placing the speakers and
subwoofer
subwoofer
Front
speaker
( left )
Front
speaker
( right )
Subwoofer
VIEWING AREA
A
Place the left and right speakers at equal
distances from the TV set and at an angle
of approximately 45 degrees from the
listening position.
of approximately 45 degrees from the
listening position.
B
Place the subwoofer on the fl oor near the
TV, main set and AC power outlet.
Helpful Hint:
– To avoid magnetic interference, do not
position the front speakers too close to your
TV set.
– Allow adequate ventilation around the
DVD Recordable System.
– To avoid magnetic interference, do not
position the front speakers too close to your
TV set.
– Allow adequate ventilation around the
DVD Recordable System.
B. Connecting the speakers
and subwoofer
and subwoofer
&20321(179,'(2287
A
Connect the terminal marked “DIN
OUT” on the rear of the amplifi er to
“DIN IN” on the rear of the subwoofer
with the supplied DIN cable by matching
the pins. Fix the two screws on each
connector of the cable to ensure fi rm
connection.
“DIN IN” on the rear of the subwoofer
with the supplied DIN cable by matching
the pins. Fix the two screws on each
connector of the cable to ensure fi rm
connection.
B
Connect the speaker wires to the
SPEAKERS OUT terminals on the
rear of the subwoofer, right speaker
to “R” and left speaker to“L”, colored
(marked) wire to “+” and black
(unmarked) wire to “–”. Fully insert the
stripped portion of the speaker wire into
the terminal as shown.
rear of the subwoofer, right speaker
to “R” and left speaker to“L”, colored
(marked) wire to “+” and black
(unmarked) wire to “–”. Fully insert the
stripped portion of the speaker wire into
the terminal as shown.
Helpful Hint:
– The supplied DIN cable is only used in
connection of the subwoofer and main set of
this system. Never try it for any other
purposes.
– Ensure that the speaker cables are
correctly connected. Improper connections
may damage the system due to short-circuit.
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to
any one pair of +/- speaker jacks.
– Do not connect speakers with an
impedance lower than the speakers supplied.
Please refer to the SPECIFICATIONS section
of this manual.
– The supplied DIN cable is only used in
connection of the subwoofer and main set of
this system. Never try it for any other
purposes.
– Ensure that the speaker cables are
correctly connected. Improper connections
may damage the system due to short-circuit.
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to
any one pair of +/- speaker jacks.
– Do not connect speakers with an
impedance lower than the speakers supplied.
Please refer to the SPECIFICATIONS section
of this manual.
A
B
pg001-pg080_RTH718_eng_98.indd 16
pg001-pg080_RTH718_eng_98.indd 16
2006-10-20 10:41:43 AM
2006-10-20 10:41:43 AM