Philips RTH718 ユーザーズマニュアル

ページ / 81
English
19
TIPS:  Before making or changing any connections, make sure that all the devices are disconnected 
from the power outlet.
Step 1: Basic Recorder Connections 
(continued)
G Connecting the video 
cable(s)
COMPONENT  VIDEO  OUT
AU D IO
O U T
S-V ID E O
IN
V ID E O   IN
TV
This connection enables you to view the
disc playback from the recorder.
You only need to choose one of the
options below to make your video 
connection. 
(good picture quality)
Option 1: Using Video (CVBS) jack 
(good picture quality)
  Use the supplied composite video cable 
(yellow) to connect the VIDEO OUT 
jack on the recorder to the video input 
jack (or labeled as A/V In, Video In or 
Composite) on the TV.
Option 2: Using S-Video jack 
(excellent picture quality)
  Use an S-video cable (not supplied) to
connect the S-VIDEO OUT jack on the 
recorder to the S-Video input
jack (or labeled as Y/C or S-VHS) on
the TV.
Option 3 : Using Component Video 
jack (best picture quality)
A
 
Use the component video cables (red/
blue/green - not supplied) to connect the 
COMPONENT VIDEO OUT (Y Pb/
Cb Pr/Cr)
 jacks on the recorder to the 
corresponding component video input 
jacks (or labeled as Y Pb/Cb Pr/Cr or 
YUV) on the TV.
B
 If your TV accepts Progressive Scan signal, 
see “Setup Menu Options - VIDEO 
settings” for detailed Progressive Scan set 
up.
IMPORTANT!
The progressive scan video quality is
only available through a Y P
B
 P
R
connection and a progressive TV is
required. It is strongly advised to
complete the recorder installation 
fi rst, before enabling the progressive 
scan feature.
Option 1
Option 2
Option 3
pg001-pg080_RTH718_eng_98.indd   19
pg001-pg080_RTH718_eng_98.indd   19
2006-10-20   10:41:48 AM
2006-10-20   10:41:48 AM