Philips RTH718 ユーザーズマニュアル

ページ / 81
English
23
TIPS:  Before making or changing any connections, make sure that all the devices are disconnected 
from the power outlet.
Step 2: Optional Connections
 (continued)
COMPONENT  VIDEO  OUT
AU D IO
O U T
S-V ID E O
IN
V ID E O   IN
TV
 
 
VIDEO 
IN 
OUT
IN
AUDIO
L
AUDIO
R
 
 
VIDEO 
OUT
AUDIO
L
AUDIO
R
VHF/UHF
RF IN
VHF/UHF
RF OUT
CABLE
SATELLITE
ANTENNA
Connecting to a VCR or 
other similar device
This connection enables you to record
from a video tape to the HDD or a DVD 
recordable disc and allows the VCR to be 
used for playback if the recorder is 
turned off.  
IMPORTANT!
Your new recorder can replace the
VCR for all your recording needs.
Just unplug all the connections to 
your VCR.
A
 Connect the Antenna/Cable TV signal to  
the ANTENNA (IN) jack on the 
recorder.
B
 Use a RF coaxial cable to connect the 
TV (OUT) jack on the recorder to the 
antenna input jack on your TV (VHF/UHF 
RF IN.)
C
 Use the audio/video cables to connect 
the VIDEO IN - EXT 1 and AUDIO 
IN (L/R)
 jacks on the recorder to the 
matching VIDEO/AUDIO output jacks on 
the VCR.
D
 Use the audio/video cables to connect 
the VIDEO OUT and AUDIO OUT 
(L/R)
 jacks on the recorder to the 
matching VIDEO/AUDIO input jacks on 
the TV.
Helpful Hints:
–  Most commercial video cassettes and
DVDs are copy-protected and therefore
cannot be recorded.
–  Connect the recorder directly to the
TV. If there is a VCR or an additional device 
in between, the picture quality may be poor
because of the copy protection system built
into the recorder.
A
B
C
D
pg001-pg080_RTH718_eng_98.indd   23
pg001-pg080_RTH718_eng_98.indd   23
2006-10-20   10:41:54 AM
2006-10-20   10:41:54 AM