Philips RTH718 ユーザーズマニュアル
English
71
AUDIO settings
(underlined options are the factory default settings)
Setup Menu Options
(continued)
Press to access this menu and use
keys to select one of
the options.
{ RAW }
– Select this if you have used the recorder’s COAXIAL
OUT jack to connect to a multichannel receiver.
{ LPCM }
– Select this if you have used the recorder’s COAXIAL
OUT jack to connect to a stereo or audio/video
system.
This setting allows you to select between two levels:
{ LPCM 48 kHz} – Select this if the connected audio device is
capable of processing digital signal input with
sampling rates of 48 kHz. In addition, the disc
you are playing back must be recorded in 48kHz
LPCM format.
{ LPCM 96 kHz} – Select this if the connected audio device is
capable of processing digital signal input with
sampling rates of 96 kHz.In addition, the disc
you are playing back must be recorded in 96kHz
LPCM format.
SPDIF Output
LPCM Output
PREFERENCES settings
(underlined options are the factory default settings)
Press to reset the menu settings of this recorder.
A warning message will appear. Select
OK
OK
in the menu to
proceed or
OK
CANCEL
to abort, then press
OK
to confi rm.
The screen saver prevents damage to the TV screen by
avoiding exposure to a static image for too long.
avoiding exposure to a static image for too long.
Press to access this menu and use
keys to select one of
the options.
{
On
}
– Select this if you wish to turn off the TV screen, after
playback had been stopped or paused for more than
3 minutes.
{
Off
}
– Select this to disable the screen saver.
Reset Menu settings
Screensaver
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press SETUP to exit the menu.
pg001-pg080_RTH718_eng_98.indd 71
pg001-pg080_RTH718_eng_98.indd 71
2006-10-20 10:42:47 AM
2006-10-20 10:42:47 AM