Philips V200 ユーザーズマニュアル

REF 1057983 A

Respironics V200 Ventilator Operator’s Manual

The Neonatal option allows the Respironics V200 Ventilator to ventilate 
intubated neonatal patients with an ideal body weight range of 0.5 - 6.5 kg 
(1.10 - 14.33 lb.) and an endotracheal tube I.D. range from 2.5 - 4.0 mm. 
The option provides pressure control in A/C, SIMV, and Apnea ventilation and 
also provides pressure support in SIMV and CPAP. The Neonatal Option is not 
available in VCV or NPPV modes.

The Neonatal option requires the following software and accessories for proper 
use:

Neonatal option loaded and enabled.

NOTE:

Ventilators with the Neonatal option software 
installed are identified by the option label 
located near the power switch.

Neonatal patient circuits (10 mm I.D.)

Fisher & Paykel reusable circuit 

Hudson RCI disposable circuit

Fisher & Paykel disposable circuit 

22mm, Male x Male Connector (Refer to Figure 13-52.)

coupling, Straight Silicone

900MR780

780-07

RT131

(RT125 is EU equivalent)

1002505

500-1000-43

NOTE:

We recommend using approved circuits or equivalent when connecting 
to the ventilator.

Filter

Connector

Circuit

Silicone coupler