Philips V200 ユーザーズマニュアル

 

Respironics V200 Ventilator Operator’s Manual

REF 1057983 A

The ventilator will reset out of Apnea Ventilation if the operator presses the 
Alarm Reset button, or if the patient triggers two successive breaths.

Safety valve open is an emergency mode of ventilation that allows the patient 
to breathe through the system whenever any of the following occur:

1.

An occlusion is detected. 
(The ventilator resumes normal breathe delivery if the occlusion is 
removed.)

2.

Loss of both the air supply and the oxygen supply occurs. 
(The ventilator resumes normal breath delivery if the gas supply is made 
available.)

3.

The Ventilator Inoperative state (Vent InOp) is entered due to a hardware 
malfunction that prevents breath delivery. 
(The ventilator will not resume normal breath delivery in this case. Call for 
service.)

During SVO:

1.

The safety valve is opened,

2.

The exhalation valve is opened,

3.

The air and oxygen valves remain closed,

4.

A high priority alarm is activated,

5.

The Safety Valve Open indicator is illuminated,

6.

The Normal indicator is turned off.

Settings

Tidal Volume
Peak Flow
PEEP
I-Trigger (pressure/flow)
Flow pattern
O

2

 %

Insp Hold
Apnea Rate

Inhalation Pressure
Inhalation Time
PEEP
I-Trigger (pressure/flow)
Rise Time
O

2

 %

Apnea Rate

IPAP
EPAP
Inhalation Time
Rise Time
I-Trigger (flow)
E-Cycle
O

2

%

Apnea Rate

Alarm 
Limits

High Pressure
Low Insp Pressure
Low PEEP
Low Mandatory Tidal Volume
High Rate
High Exhaled Minute Volume
Low Exhaled Minute Volume

High Pressure
Low Insp Pressure
Low PEEP
Low Mandatory Tidal Volume
High Rate
High Exhaled Minute Volume
Low Exhaled Minute Volume

Low Pressure
Low EPAP
Low Tidal Volume
High Rate
Low Exhaled Minute Volume
High Leak