Smeg SHC700X ユーザーズマニュアル

 

 

 

 

 

 

•  This cannot be washed or regenerated, and must be changed when all the command LEDs 

start to flash, or at least once every 4 months.  

Activating the alarm signal 
•  In Recirculation Version Hoods, the Filter Saturation Alarm must be activated on installation or at 

a later date. 

•  Press and hold the Delay button (T4) on the keypad for 5 seconds and the following will be dis-

played: 

  •  Leds (L1-L2-L3) flash twice – Activated Charcoal Filter saturation alarm ACTIVATED. 
  •  Leds (L1-L2-L3) flash once – Activated Charcoal Filter saturation alarm DEACTI

 VATED. 

CHANGING THE ACTIVATED CHARCOAL FILTER 

Resetting the alarm signal 
• Press 

button 

T1 (see the paragraph on Use). 

Changing the Filter 
•  Pull the Comfort Panels to open them. 
•  Remove the Metal grease filters. 
•  Remove the saturated Activated Charcoal Filters, as indicated (A). 
•  Fit the new Filters, as indicated (B). 
•  Replace the Metal grease filters. 
•  Close the comfort panel.s 

 

 

 

 

20 W halogen light. 
•  Extract the lamp from the lamp holder by pulling gently. 
•  Replace with another of the same type, making sure that the 

two pins are properly inserted in the lamp holder socket holes.