Sony STR-DA5300ES ユーザーズマニュアル
115
GB
O
the
r O
r O
p
erati
ons
Tuning radio stations
1
Press TUNER repeatedly to select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press TUNING + or TUNING –.
Press TUNING + to scan from low to high
frequencies, press TUNING – to scan from
high to low frequencies. The receiver stops
scanning whenever a station is received.
You can also press TUNING MODE on the
receiver to select “AUTO,” and then turn
TUNING to select stations.
Press TUNING + to scan from low to high
frequencies, press TUNING – to scan from
high to low frequencies. The receiver stops
scanning whenever a station is received.
You can also press TUNING MODE on the
receiver to select “AUTO,” and then turn
TUNING to select stations.
Selecting a frequency directly
(Direct tuning)
(Direct tuning)
1
After selecting the FM or AM band,
press D.TUNING.
press D.TUNING.
2
Press the numeric buttons to enter the
frequencies, then press
frequencies, then press
to enter.
1
Tune in the station that you
want to preset.
want to preset.
For details on the operation, refer to
“Tuning radio stations.”
“Tuning radio stations.”
2
Press MEMORY.
“MEMORY” appears on the display for a
few seconds. Perform steps 3 and 4 before
the display changes.
few seconds. Perform steps 3 and 4 before
the display changes.
3
Press PRESET + or PRESET –
to select a preset number.
to select a preset number.
30 FM and 30 AM preset numbers are
available. If “MEMORY” disappears
before you select the preset number, start
again from step 2.
available. If “MEMORY” disappears
before you select the preset number, start
again from step 2.
4
Press ENTER.
The station is stored as the selected preset
number. If “MEMORY” disappears
number. If “MEMORY” disappears
before you select the preset number, start
again from step 2.
again from step 2.
5
Repeat steps 1 to 4 to preset
another station.
another station.
Selecting a preset station
1
Press TUNER repeatedly to select the
FM or AM band.
FM or AM band.
2
Press PRESET+ or PRESET –
repeatedly to select the preset station
you want.
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
You can also press TUNING MODE on the
receiver repeatedly to select “PRESET,”
then use TUNING to select the preset
stations you want.
repeatedly to select the preset station
you want.
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
You can also press TUNING MODE on the
receiver repeatedly to select “PRESET,”
then use TUNING to select the preset
stations you want.
While receiving an RDS station,
press DISPLAY repeatedly.
press DISPLAY repeatedly.
Each time you press the button, RDS
information on the display changes cyclically
as follows:
PS (Program Service name)
information on the display changes cyclically
as follows:
PS (Program Service name)
a)
t Frequency,
band and preset number
t PTY (Program
Type) indication
b)
t RT (Radio Text)
indication
c)
t CT (Clock Time) indication
(in 24-hour system mode)
t Sound field type
a)
This information also appears for non-RDS FM
stations.
stations.
b)
Type of program being broadcast.
c)
Text messages sent by the RDS station.
Presetting radio stations
Displaying RDS information