Viewsonic VS14694 ユーザーガイド

16

GAMMA SELECTION
Gamma is what controls the overall brightness of an image. 

Images which are not corrected  properly can appear too white 

or too dark, so controlling the gamma properly can have a huge 

influence on the overall picture quality of your display.
The options are: {

NATIVE} / {2.2} / {2.4} / {S GAMMA}.

NOISE REDUCTION
Adjust to remove the noise in the image. You can select a 

suitable noise reduction level.
The options are: {

OFF} / {LOW} / {MIDDLE} / {HIGH}.

NOTE:   This item is functional for 

HDMI(Video mode), S-Video, 

Video, and YPbPr inputs only.

FILM MODE
Choose to turn on or off the film mode frame conversion 

function.
•  {

AUTO} - Enable the film mode frame conversion function 

for movies and motion pictures. The display converts a 

24 frames-per-second (24 fps) input signal format to DVD 

video signal format. Once this function is enabled, it is 

recommended that you set the {

SCAN CONVERSION} 

function to {

PROGRESSIVE}.

•  {

OFF} - Disable the film mode frame conversion function. 

This mode is suitable for TV broadcasting and VCR signals.

PICTURE RESET
Reset all settings in the Picture menu to factory preset values.

SET

EXIT

MENU

:SEL

:NEXT

AUTO SETUP

AUTO ADJUST

H POSITION

V POSITION

CLOCK

CLOCK PHASE

ZOOM MODE

CUSTOM ZOOM

H RESOLUTION

V RESOLUTION

INPUT RESOLUTION

SCREEN RESET

SCREEN

:RETURN

:EXIT MENU

50

50

2200

66

1920

1080

FULL

OFF

AUTO SETUP
Use this function to let the display automatically optimize the 

display of VGA input image.
NOTE:   This item is functional for 

VGA input only.

AUTO ADJUST
Choose to let the display detect and display available signal 

sources automatically.
•  {

ON} - Set the display to display the image automatically 

once a signal is connected.

•  {

OFF} - Once a signal is connected, it can only be selected 

manually.

H POSITION
Press the [ ] button to move the image to the right, or [ ] to 

move the image to the left.

V POSITION
Press the [ ] button to move the image up, or [ ] to move the 

image down.
CLOCK
Adjust the width of the image.
NOTE:   This item is functional for 

VGA input only.

CLOCK PHASE
Adjust to improve the focus, clarity and stability of the image.
NOTE:   This item is functional for 

VGA input only.

ZOOM MODE
The pictures you receive may be transmitted in 16:9 format (wide 

screen) or 4:3 format (conventional screen). The 16:9 pictures 

sometimes have a black band at the top and bottom of the 

screen (letterbox format).
This function allows you to optimize the picture display on 

screen. The following zoom modes are available for: 
•  PC mode: {

FULL} / {NORMAL} / {CUSTOM} / {REAL}.

•  Video mode: {

FULL} / {NORMAL} / {DYNAMIC} / {CUSTOM} 

/ {

REAL}.

This mode restores the correct 

proportions of pictures transmitted in 

16:9 using the full screen display. 

The picture is reproduced in 4:3 format 

and a black band is displayed on either 

side of the picture.

Fill the entire screen by stretching 4:3 

pictures non-proportionally.

Choose to apply the custom zoom 

settings in the Custom Zoom submenu.

This mode displays the image pixel-

by-pixel on screen without scaling the 

original image size.

CUSTOM ZOOM
You can use this function to further customize the zoom settings 

to suit the image you want to display.
NOTE:   This item is functional only when the {

ZOOM MODE} 

setting is set to {

CUSTOM}.

Expands the horizontal and vertical sizes 

of the image simultaneously.

Expands the horizontal size of the image 

only.