Viewsonic VS14694 ユーザーガイド
22
LAN SETTING
Assign {
Assign {
IP ADDRESS}, {SUBNET MASK}, and {DEFAULT
GATEWAY} for the display.
PIP
1
2
3
2
3
EXIT
MENU
:SEL
DHCP CLIENT
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
LAN SETTING
:RETURN
:EXIT MENU
OFF
+-:ADJ
• DHCP - Choose to enable or disable the DHCP function. If
enabled, the display will be assigned IP address, Subnet
mask and Default gateway automatically. If disabled, you will
be prompted to enter the following value manually. Finally,
press [
SET] button to store and save the chosen values.
Touch PMS
Enable and disable wake up from power saving mode by touch
Enable and disable wake up from power saving mode by touch
screen.
ADVANCED OPTION RESET
Reset all settings in the
ADVANCED OPTION RESET
Reset all settings in the
ADVANCED OPTION menu to factory
preset values.
1. Press [
1. Press [
SET] button to enter the submenu.
2. Press [ ] or [ ] button to select {
YES}, and then press
[
SET] button to do the reset.
EXIT
MENU
SET
:SEL
:RETURN
:SET
:EXIT MENU
ADVANCED OPTION RESET
NO
YES
FACTORY RESET
Reset all the settings in the OSD menus of {
Reset all the settings in the OSD menus of {
PICTURE},
{
SCREEN}, {AUDIO}, {PIP}, {CONFIGURATION1},
{
CONFIGURATION2}, {CONFIGURATION3}, and {ADVANCED
OPTION} to factory preset values.
1. Press [
1. Press [
SET] button to enter the submenu.
2. Press [ ] or [ ] button to select {
YES}, and then press
[
SET] button to do the reset.
EXIT
MENU
SET
:SEL
:RETURN
:SET
:EXIT MENU
FACTORY RESET
NO
YES