Yamaha HTR-5790 ユーザーズマニュアル

This section describes the function of each control on the 
remote control. See “REMOTE CONTROL FEATURES” 
on page 59 to operate other components with this remote 
control.

1

Outputs infrared control signals. Aim this window at the 
component you want to operate.

2

Flashes while the remote control is sending signals.

3

Sets this unit in the standby mode.

4

Turns on the power of this unit.

5

Select the input source and change the control area.

6

Shows the name of the selected source component that 
you can control.

7

Selects the speaker channel to be adjusted and sets the 
level.

8

u

d 

j

i

Use to select and adjust DSP program parameters or SET 
MENU items.

9

Outputs the test tone to adjust the speaker levels.

0

Use to select sound field programs or input numbers.

A

Used for changing the input source name in the display 
window (see page 62).

B

Used for clearing functions acquired when using the learn 
and rename features, or setting manufacturer codes (see 
page 63).

C

Used for setting up the manufacturer code or for 
programming functions from other remote controls (see 
pages 60 and 61).

D

Sets the sleep timer.

E

Sets the priority (AUTO, DTS, ANALOG) for the type of 
signals received when one component is connected to two 
or more of this unit’s input jacks (see page 34). Priority 
cannot be set when MULTI CH INPUT is selected as the 
input source.

F

Selects the MULTI CH INPUT mode when using an 
external decoder (etc.).

G

k

n

Selects another component that you can control 
independently of the input component selected with the 
input selector buttons.

H

Selects AMP or other component selected by the input 
selector button.

00_HTR-5790U_EN.book  Page 6  Tuesday, December 9, 2003  9:16 AM